Laird T-Putty 607

PRODUCT DESCRIPTION:

Laird T-Putty™ 607 is a high thermally conductive single part dispensable material designed with automation and vertical stability in mind.

Material Supplier:

Laird

Industry:

Electronics

Application:

Thermal Management

Typical Properties:

• Construction: Ceramic Filled Silicone Based 
• Thermal Conductivity (W/mK): 6.0 
• Color: Gray 
• Flow Rate (grams/Min): 40 (.125” orifice @ 90psi)
• Density (g/cc): 3.5 
• Outgassing (%TML/%CVCM) by mass: .20/.01 
• Operating Temperature: -40º C – 150º C 

Graco UniXact C300 Automated Dispense Table with Graco Valve System

UniXact C300 Automation Table

• Work envelope of 254 mm X / 277 mm  Y / 70 mm Z 
• Approximate overall dimensions 910 mm X 910 mm X 1800 mm including safety enclosure 
• Easy and intuitive on-board operator controls 
• 15 kg+ load capability 
• 200 mm/s point to point; 100 mm/s dispense speed 
• Material & application dependent 
• Repeatability of the machine is ± 0.01 mm (0.0004 in) 
• Accuracy is ± 0.1 mm/300 mm (± 0.004 in/12 in) 
• 3D contouring dispense capability 
• Servo drive motors for X, Y, Z and dispense axis (theta) 
• Ball screw drives with linear guide bearings 
• Needle feature options – Automatic needle calibration and clean 
• Optional Y slides to decrease cycle time 
• Light curtain, guarding, and safety interlock system 
• Real-time process monitoring with data download 
• Proprietary Graco software with easy to use interface 

Continuous Positive Displacement Pump

• 1cc per revolution 
• 1/2 revolution reverse after dispense 
• Outlet needle range 12 to 14 gauge 

Delivery Method

• Dynamite, single acting supply pump 
• 1 gallon pail follower plate 
• Air driven pump with 12:1 power factor 
• Stainless steel construction 
• 5.0 cc (0.17 oz) per stroke (single acting) displacement volume 
• Includes connection hoses and fittings to dispense valve

Laird is a registered trademark of Laird PLC. For complete product information, please refer to laird.com.

Download the spec sheet