Graco Inc.

Husky Transfer Pumps for 55 Gallon Drums  0.5 and 0.75 inch Positive Displacement Double Diaphragm Pumps for 55 Gallon Drums (208 liters)

AODD pumps with 1/2 inch (12.7 mm) and 3/4 inch (19.05 mm) connections available in polypropylene, acetal, aluminum and stainless steel

Where to BuyRequest Info
Husky Transfer Pump for 55 Gallon drums

Our Husky 515 and 716 diaphragm pumps are ideal for evacuating 55 gallon (208 liter) drums since they are free of rotating parts. These transfer pump packages can handle abrasive and shear sensitive fluids up to 5,000 cps with flow rates up to 16 gpm (61 lpm). 

The suction tube length can be adjusted from 31.5 inches to 34 inches (80-86 cm) with our easyout-seal assembly, making sure that our pumps will fit the height of your drums. 

  • Intake tubes available in stainless steel, polypropylene and aluminum
  • Pump is never immersed inside the drum (only the suction tube is immersed)
  • Quick priming and immediate flow of product
  • Pump can run dry without damage
  • Provides air tight seal for moisture sensitive fluids
  • Bung adapter fits in to any 2 inch (50.8 mm) bung opening
  • Easyout-seal provides fast slide in and out of drums through bung adapter without disconnecting hoses

Husky 515 and Husky 716 Drum Pump Kits and Packages
Maximum fluid working pressure
100 psi
7 bar, 0.7 MPa
Air pressure operating range
30-100 psi
2.1-7 bar, 0.2-0.7 MPa
Weight
233045
4.0 lb
1.8 kg
233046
4.5 lb
2 kg
233047
6.5 lb
2.9 kg
233048
9.5 lb
4.3 kg
Wetted parts
233045
polypropylene
polypropylene
233046
aluminum
aluminum
233047
stainless steel
stainless steel
233048
stainless steel
stainless steel
Non-wetted parts
(materials vary depending on kit)
expoxy-coated steel, stainless steel, PTFE, nickel-plated steel, polyethylene, polypropylene, aluminum, zinc-plated steel
expoxy-coated steel, stainless steel, PTFE, nickel-plated steel, polyethylene, polypropylene, aluminum, zinc-plated steel