The Graco e-Xtreme Electric Airless Sprayer is the world's first electric sprayer for protective coatings approved for hazardous locations. The e-Xtreme operates on a more reliable, convenient and available electric power source, which improves jobsite inefficiencies associated with compressors. If your air compressor goes down, you no longer have to stop production. More so, electric technology eliminates pulsation and motor icing, making your jobs run smoothly - every time!
e-Xtreme Electric Airless Sprayer The electric airless sprayer for protective coatings
The first electric sprayer for protective coatings approved for hazardous locations

See Why This Pro Painter Loves the e-Xtreme Electric Airless Sprayer
"It doesn’t fluctuate like air pumps do. It’s much more consistent and always has a good pattern regardless of which tip you use."
- Dean Stewart, Iron Works
Learn Why the e-Xtreme Sprayer is Your Electric Solution for Spraying Protective Coatings

- Electric
- Electric power is safe, reliable, and convenient
- No Icing
- No air motor = no more icing issues
- Reduced Noise
- Significantly quieter when compared to an air motor
- Plug-in & Spray
- 240V/16A power ensures smooth, low-pulsation spraying
- Hazardous Location Approved
- ATEX, IECEx, and Class 1, Div. 1 approvals*
- Energy Savings
- Saves up to 80% of energy costs when compared to an air operated sprayer**
*See product manual for specifics on hazardous location approvals and for proper wiring requirements. **Study completed on pump pressure of 3500 psi (241 bar) for 20 hours/week; spraying 324 gal (1.226 l) of 73% volume solids epoxy with XHD519 tip.
Applications
- Chemical plants
- In-plant paint shops
- Marine
- Metal fabrication
- Rail
- Refineries & off-shore
- Storage tanks
- Structural steel
- Water and wastewater coatings
Request a Free Demo
No cost. No obligation.
Sign up below

Features:
- Plug-in and spray electrical power - no compressors needed
- No air motor means no icing
- Quiet operation for when sound is an issue
- Hazardous location approved - the first of its kind
- Plenty of power for all sorts of applications
- Available 3-year extended warranty
Manuals
Literature
- 349691ENEU e-Xtreme Electric Airless Sprayer [other languages]
- 300738ENEU Ship & Rig Building Equipment [other languages]
- 300737ENEU Marine Equipment [other languages]
349691ENEU e-Xtreme Electric Airless Sprayer
300738ENEU Ship & Rig Building Equipment
Ex35 e-Xtreme Sprayers | |
Maximum fluid working pressure | 3500 psi 240 bar, 24.0 MPa |
Stroke length | 4.75 in. 120 mm |
Maximum continuous cycle rate | 44 cycles per minute 44 cycles per minute |
Tip Size | .023 in. .023 in. |
Weight | 295 lb 135 kg |
Wetted parts | Carbon Steel, Alloy Steel, 304, 440 and 17–PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum Carbon Steel, Alloy Steel, 304, 440 and 17–PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum |
Operating temperature range | 23° to 120° F -5° to 50° C |
Input voltage | 200–240 VAC, single phase, 50/60 Hz 200–240 VAC, single phase, 50/60 Hz |
Input power | 2.5 kVA 2.5 kVA |
Minimum Recommended generator size | 5 kW 5 kW |
Oil capacity | 1.0–1.2 quarts 0.9–1.1 liters |
Oil specification | Graco part number 16W645 silicone-free ISO 220 synthetic EP gear oil Graco part number 16W645 silicone-free ISO 220 synthetic EP gear oil |
Inlet / Outlet Sizes | |
Fluid inlet size | 1 in. npt(m) [also includes 1 in. nps(swivel) to 1 in. npt(m) adapter elbow] 1 in. npt(m) [also includes 1 in. nps(swivel) to 1 in. npt(m) adapter elbow] |
Fluid outlet size | 1/2 npt(m) [also includes 1/2 npt(f) to 3/8 npt(m) adapter] 1/2 npt(m) [also includes 1/2 npt(f) to 3/8 npt(m) adapter] |
Hose Requirements | |
Minimum pressure | The minimum hose pressure rating should be equal to or greater than the maximum fluid working pressure of sprayer The minimum hose pressure rating should be equal to or greater than the maximum fluid working pressure of sprayer |
Minimum length | 50 ft. 15 m |
Minimum ID | 3/8 in. 10mm |
Maximum resistance per ISO 8028 | 9,100 ohms/ft 30,000 ohms/m |
Sound Emissions (per ISO 9614) for Normal Operation (Spraying @ 20 cpm) | |
Sound Pressure LpA Average | 70.2 dBA 70.2 dBA |
Sound Power LwA Total Power | 76.7 dBA 76.7 dBA |
Sound Emissions (per ISO 9614) for Maximum Speed (Flushing @ 44 cpm) | |
Sound Pressure LpA Average | 77.4 dBA 77.4 dBA |
Sound Power LwA Total Power | 85.1 dBA 85.1 dBA |
Ex45 e-Xtreme Sprayers | |
Maximum fluid working pressure | 4500 psi 310 bar, 31.0 MPa |
Stroke length | 4.75 in. 120 mm |
Maximum continuous cycle rate | 44 cycles per minute 44 cycles per minute |
Tip Size | .021 in. .021 in. |
Weight | 295 lb 135 kg |
Wetted parts | Carbon Steel, Alloy Steel, 304, 440 and 17–PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum Carbon Steel, Alloy Steel, 304, 440 and 17–PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum |
Operating temperature range | 23° to 120° F -5° to 50° C |
Input voltage | 200–240 VAC, single phase, 50/60 Hz 200–240 VAC, single phase, 50/60 Hz |
Input power | 2.5 kVA 2.5 kVA |
Minimum Recommended generator size | 5 kW 5 kW |
Oil capacity | 1.0–1.2 quarts 0.9–1.1 liters |
Oil specification | Graco part number 16W645 silicone-free ISO 220 synthetic EP gear oil Graco part number 16W645 silicone-free ISO 220 synthetic EP gear oil |
Inlet / Outlet Sizes | |
Fluid inlet size | 1 in. npt(m) [also includes 1 in. nps(swivel) to 1 in. npt(m) adapter elbow] 1 in. npt(m) [also includes 1 in. nps(swivel) to 1 in. npt(m) adapter elbow] |
Fluid outlet size | 1/2 npt(m) [also includes 1/2 npt(f) to 3/8 npt(m) adapter] 1/2 npt(m) [also includes 1/2 npt(f) to 3/8 npt(m) adapter] |
Hose Requirements | |
Minimum pressure | The minimum hose pressure rating should be equal to or greater than the maximum fluid working pressure of sprayer The minimum hose pressure rating should be equal to or greater than the maximum fluid working pressure of sprayer |
Minimum length | 50 ft. 15 m |
Minimum ID | 3/8 in. 10mm |
Maximum resistance per ISO 8028 | 9,100 ohms/ft 30,000 ohms/m |
Sound Emissions (per ISO 9614) for Normal Operation (Spraying @ 20 cpm) | |
Sound Pressure LpA Average | 70.2 dBA 70.2 dBA |
Sound Power LwA Total Power | 76.7 dBA 76.7 dBA |
Sound Emissions (per ISO 9614) for Maximum Speed (Flushing @ 44 cpm) | |
Sound Pressure LpA Average | 77.4 dBA 77.4 dBA |
Sound Power LwA Total Power | 85.1 dBA 85.1 dBA |