Graco Inc.

EcoQuip 2 EQm  Mobile Vapor Abrasive Blast Equipment

Compact, portable blast equipment fits in bed of pickup truck.

Where to BuyRequest Info
Blasting_graffiti.tif

Compact, fully portable entry-level unit

The built-in hand truck with over-sized wheels makes the EQm easy to move around the jobsite. Don't let the size fool you, this compact blaster is capable of handling any type of project, from cleaning to surface preparation.

  • Fits in the bed of most standard pickup trucks
  • blast pressure ranging from 30-175 PSI
  • Oversized wheels for easy portability
  • Pot size of 3.5 cubic ft - holds approximately (8) 55 lb bags of media

 

 

 

About Vapor Abrasive Blasting

  • Generates less dust - 92% less airborne dust than dry blasting
  • Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust
  • Uses less water than traditional water-based wet blasting
  • Designed for years of solid service

 

 

 

 

 

 

 



EcoQuip 2 EQm
Maximum Fluid Working Pressure
175 psi
12.1 bar, 1.21 MPa
Operating Temperature
35˚ - 110˚ F
1.6˚ - 43.3˚ C
Recommended Compressor Size+
185–600 CFM
5.3-17 m^3/min
Blast Hose Size (supplied)
1.25 in. ID
31.75 mm ID
Abrasive Capacity*
440 lb.
200 kg
Dry Weight
370 lb.
168 kg
Wet Weight*
900 lb.
408 kg
Pressure Pot Volume
3.5 cubic feet
184 liters
Air Inlet Connection†
1–1/2 npt
– – – – –
Water Inlet Connection
3/4 in. garden hose connection
19 mm garden hose connection
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media will decrease weight.
† 2 in. ground boss adapter included in tool box (see Parts section of the EcoQuip 2 manual for more detail).
Air Supply Hose Minimum ID
185–600 CFM compressor and less than 100 ft. hose length
1.5 in. ID
38 mm ID
Over 600 CFM compressor or greater than 100 ft. hose length
2 in. ID
51 mm ID
Sound Data**
Sound Pressure Level
133 dB(A)
133 dB(A)
Sound Power Level
139 dB(A)
139 dB(A)
Instantaneous Sound Pressure Level
131 dB(C)
131 dB(C)
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2.
+ See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on compressor pressure and flow output specifications.