Cart
President 4-Ball
3:1 President 4-Ball Pneumatic Pump, 750 cc, sealed SST Lower, 460 psi Max Working Pressure, Tri-Clamp, Standard Pump Length
Part Number: 17E225
Image is for illustrative purposes only.
President 4-Ball
3:1 President 4-Ball Pneumatic Pump, 750 cc, sealed SST Lower, 460 psi Max Working Pressure, Tri-Clamp, Standard Pump Length
Part Number: 17E225
Graco's high volume circulating pumps will allow you to handle large flow requirements while operating at low cycle rates. The pump lower requires fewer cycles per gallon and longer intervals between seal replacement, lowering your overall cost of ownership.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Graco's high volume circulating pumps will allow you to handle large flow requirements while operating at low cycle rates. The pump lower requires fewer cycles per gallon and longer intervals between seal replacement, lowering your overall cost of ownership.
- Excellent abrasion and corrosion resistance with large porting for excellent priming and handling of high viscosity fluids
- Stainless steel and carbon steel wetted parts for a wide range of fluids
- Ultralife Series ceramic coating holds up to the harshest materials, including water-borne paints
- Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Inlet Size (in) | 0.5 |
|---|---|
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Circulation |
| Compatible Material | Water-borne, Solvent-borne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC |
| Fluid Outlet Size (in) | 1 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | Sealed |
| Material | Stainless Steel |
| Maximum Air Inlet Pressure (psi) | 150 |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (gpm) | 9.6 |
| Maximum Operating Temperature (°F) | 150 |
| Maximum Working Pressure (MPa) | 3.2 |
| Maximum Working Pressure (psi) | 460 |
| Model | President |
| Portable | Non-Portable |
| Pump Ratio | 3:1 |
| Series | 4-Ball |
| Type | Pneumatic Piston Pump |
| Wetted Material | Stainless Steel |
| Air Inlet Size (in) | 0.5 |
| Air Inlet Size (mm) | 12.7 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Circulation |
| Compatible Material | Water-borne, Solvent-borne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC |
| Fluid Outlet Size (in) | 1 |
| Fluid Outlet Size (mm) | 25.4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | Sealed |
| Material | Stainless Steel |
| Maximum Air Inlet Pressure (bar) | 10.34 |
| Maximum Air Inlet Pressure (kPa) | 1034 |
| Maximum Air Inlet Pressure (psi) | 150 |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (l/min) | 36.34 |
| Maximum Operating Temperature (°C) | 66 |
| Maximum Working Pressure (MPa) | 3.2 |
| Maximum Working Pressure (bar) | 32 |
| Maximum Working Pressure (kPa) | 3200 |
| Maximum Working Pressure (psi) | 460 |
| Model | President |
| Portable | Non-Portable |
| Pump Ratio | 3:1 |
| Series | 4-Ball |
| Type | Pneumatic Piston Pump |
| Wetted Material | Stainless Steel |
Product Manuals
CAD Drawings
17E222-3D-EN.zip
(9 MB)
Recommended Accessories
