Cart
Corrosion Resistant Fluid Back Pressure Regulator, 20.7 bar max, SST, Acetal & PTFE Wetted Parts, 1-1/4 (f) x 1-1/4 (f), with Gauge
Part Number: 224486
Image is for illustrative purposes only.
Corrosion Resistant Fluid Back Pressure Regulator, 20.7 bar max, SST, Acetal & PTFE Wetted Parts, 1-1/4 (f) x 1-1/4 (f), with Gauge
Part Number: 224486
Control upstream fluid pressure with Graco back pressure regulators. Our back pressure regulators use closed loop control to maintain the pressure of the system regardless of flow demand. This allows operators to trigger guns, valves, and other flow controls without changing the system pressure.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Control upstream fluid pressure with Graco back pressure regulators. Our back pressure regulators use closed loop control to maintain the pressure of the system regardless of flow demand. This allows operators to trigger guns, valves, and other flow controls without changing the system pressure.
- Stainless steel membrane diaphragm is highly wear resistant while maintaining accurate responsiveness
- Low Shear diaphragm valve has minimal restriction to reduce material degradation and colour matching issues, especially with metallic paint
- Stainless steel wetted materials are compatible with catalyst and water-borne materials
- Large fluid passages to accommodate high volume flow rates
Specifications & Documents
Technical Specifications
Convert to Imperial| Compatible Material | Catalyst, Water-borne |
|---|---|
| Gauge Port Size (in) | 1/4 |
| Gauge Port Type | NPT |
| Includes | Gauge |
| Inlet Size (in) | 1-1/2 |
| Inlet Thread Type | NPT |
| Maximum Flow Rate (gpm) | 20 |
| Maximum Regulated Pressure (psi) | 200 |
| Maximum Viscosity (cP) | 1000 |
| Maximum Working Pressure (psi) | 300 |
| Minimum Regulated Pressure (MPa) | 0.1 |
| Minimum Regulated Pressure (psi) | 15 |
| Outlet Size (in) | 1-1/2 |
| Outlet Thread Type | NPT |
| Type | Back Pressure Regulator |
| Wetted Material | Stainless Steel, Acetal, PTFE |
| Compatible Material | Catalyst, Water-borne |
| Gauge Port Size (cm) | 0.635 |
| Gauge Port Size (in) | 1/4 |
| Gauge Port Size (mm) | 6.35 |
| Gauge Port Type | NPT |
| Includes | Gauge |
| Inlet Size (cm) | 3.81 |
| Inlet Size (in) | 1-1/2 |
| Inlet Size (mm) | 38.1 |
| Inlet Thread Type | NPT |
| Maximum Flow Rate (l/min) | 75 |
| Maximum Regulated Pressure (bar) | 14 |
| Maximum Regulated Pressure (kPa) | 1400 |
| Maximum Regulated Pressure (psi) | 200 |
| Maximum Viscosity (cP) | 1000 |
| Maximum Working Pressure (bar) | 21 |
| Maximum Working Pressure (kPa) | 2100 |
| Maximum Working Pressure (psi) | 300 |
| Minimum Regulated Pressure (MPa) | 0.1 |
| Minimum Regulated Pressure (bar) | 1 |
| Minimum Regulated Pressure (kPa) | 100 |
| Minimum Regulated Pressure (psi) | 15 |
| Outlet Size (cm) | 3.81 |
| Outlet Size (in) | 1-1/2 |
| Outlet Size (mm) | 38.1 |
| Outlet Thread Type | NPT |
| Type | Back Pressure Regulator |
| Wetted Material | Stainless Steel, Acetal, PTFE |
