Cart
New
PR-Xv Posi-Ratio®
PR-Xv, Pump Feed, TC Valve, Direct Mount with High Wear Tube, 2:1 to 10:1
Part Number: 25S198
Image is for illustrative purposes only.
Image is for illustrative purposes only.
Image is for illustrative purposes only.
PR-Xv Posi-Ratio®
PR-Xv, Pump Feed, TC Valve, Direct Mount with High Wear Tube, 2:1 to 10:1
Part Number: 25S198
Posi-Ratio® (PR) system offers the extreme variability (-Xv) needed for precise meter, mix and dispense of two component adhesives and sealants.
Features
Product Brochure
Posi-Ratio® (PR) system offers the extreme variability (-Xv) needed for precise meter, mix and dispense of two component adhesives and sealants.
Innovative design and durability make this variable ratio system ideal for bonding, gasketing, metering, potting, sealing and thermal management applications.
- Shot size range of 0.1 to 75 ccs meets 2:1 to 10:1 ratio demands with +/- 1 percent shot repeatability.
- Base purge conserves the amount of material used.
- Patented first-in-first-out (FIFO) fluid path eliminates dead zones, where material can accumulate.
- Twin Control (TC) Valve individually regulates on and off of A and B outlets.
- Ceramic (CER) metering tube withstands high wear applications of thermal interface material (TIM), other fillers, and different viscosities.
- Small size and low mass allow for installation flexibility for stand-alone benchtop and automated applications.
- Servo motor delivers precise and repeatable dispense.
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Inlet Size (in) | 1/4 |
|---|---|
| Ambient/Warm Melt/Hot Melt | Ambient |
| Application | Adhesive, Sealant |
| Applicator Type | Twin Control (TC) Dispense Valve |
| Coating Type | High Wear |
| Fluid Outlet Size (in) | 7/8-9 |
| Footprint (in) | 21.53x5.71x6.16 |
| Frequency (Hz) | 50/60 |
| Maximum Air Inlet Pressure (psi) | 100 |
| Maximum Fluid Working Pressure (MPa) | 8.3000000000000007 |
| Maximum Fluid Working Pressure (psi) | 1200 |
| Mix Ratio | 2:1 to 10:1 |
| Model | PR-Xv |
| Overall Depth (in) | 5.71 |
| Overall Height (in) | 6.16 |
| Overall Width (in) | 21.53 |
| Power Input (V) | 220-240 |
| Series | Posi-Ratio® |
| Shot Size Range (cc) | 0.03-100 |
| Type | Dispensing System |
| Weight (lb) | 56.8 |
| Wetted Material | 303/304 Stainless Steel, Hard Chrome, Ceramic, UHMWPE, NBR, Carbon Steel, PTFE |
| Air Inlet Size (in) | 1/4 |
| Air Inlet Size (mm) | 6 |
| Ambient/Warm Melt/Hot Melt | Ambient |
| Application | Adhesive, Sealant |
| Applicator Type | Twin Control (TC) Dispense Valve |
| Coating Type | High Wear |
| Fluid Outlet Size (in) | 7/8-9 |
| Footprint (in) | 21.53x5.71x6.16 |
| Frequency (Hz) | 50/60 |
| Maximum Air Inlet Pressure (bar) | 7 |
| Maximum Air Inlet Pressure (kPa) | 700 |
| Maximum Air Inlet Pressure (psi) | 100 |
| Maximum Fluid Working Pressure (MPa) | 8.3000000000000007 |
| Maximum Fluid Working Pressure (bar) | 83 |
| Maximum Fluid Working Pressure (psi) | 1200 |
| Mix Ratio | 2:1 to 10:1 |
| Model | PR-Xv |
| Overall Depth (cm) | 14.5 |
| Overall Depth (mm) | 145 |
| Overall Height (cm) | 15.6 |
| Overall Height (mm) | 156 |
| Overall Width (cm) | 75.900000000000006 |
| Overall Width (mm) | 759 |
| Power Input (V) | 220-240 |
| Series | Posi-Ratio® |
| Shot Size Range (cc) | 0.03-100 |
| Type | Dispensing System |
| Weight (kg) | 26 |
| Wetted Material | 303/304 Stainless Steel, Hard Chrome, Ceramic, UHMWPE, NBR, Carbon Steel, PTFE |
Product Manuals
