E-Flo Dci 4-Ball
E-Flo DCi 4-Ball Electric Pump, 1500cc, 2.2 kW (3 HP), 380-480 VAC 3 Phase, SST Chrome Lower, Tri-Clamp, Wall Mount
Part Number: YB4582
E-Flo Dci 4-Ball
E-Flo DCi 4-Ball Electric Pump, 1500cc, 2.2 kW (3 HP), 380-480 VAC 3 Phase, SST Chrome Lower, Tri-Clamp, Wall Mount
Part Number: YB4582
Direct current (DC) circulation pump with intelligent (i) control drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 1500 cc configuration powers maximum continuous flow rate.
Product is Discontinued
Replacement Product Not Available
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Direct current (DC) circulation pump with intelligent (i) control drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 1500 cc configuration powers maximum continuous flow rate.
Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.
- 2.2 kW (3 horse power (HP)) motor is modular, so that it can easily replace existing Graco pneumatic or hydraulic pump motors.
- ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
- Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
- Stainless steel (SST) chrome lower is sealed from outside conditions, so that it needs little to no maintenance.
- Wall mount takes so little space that it can fit almost anywhere in a factory paint mix room.
- The DCi Link Communication Module (part number 25X675) requires minimal field wiring to connect to factory PLC (programmable logic controller).
Specifications & Documents
Technical Specifications
Convert to ImperialApplication | Circulation |
---|---|
Compatible Material | Solvent-borne, High Solids, Xirallic, Metallics, Varnish, CARC, Water-borne |
Cycles Per Gallon | 2.5 |
Fluid Inlet Size (in) | 1.5 |
Fluid Inlet Thread Type | Sanitary Quick Clamp |
Fluid Outlet Size (in) | 1.5 |
Fluid Outlet Thread Type | Sanitary Quick Clamp |
Fluid Section Type | Sealed 4-Ball |
Includes | Basic Controls, Wall Mount |
Input Voltage (V AC) | 380 - 480 |
Lower Type | Sealed 4-Ball |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (cpm) | 20 |
Maximum Flow Rate (gpm) | 7.9 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°F) | 104 |
Maximum Working Pressure (MPa) | 3.1 |
Maximum Working Pressure (psi) | 450 |
Minimum Operating Temperature (°F) | 32 |
Model | E-Flo |
Motor Type | AC |
Portable | Non-Portable |
Power Rating (HP) | 3 |
Series | Dci 4-Ball |
Type | Electric Piston Pump |
Application | Circulation |
Compatible Material | Solvent-borne, High Solids, Xirallic, Metallics, Varnish, CARC, Water-borne |
Cycles Per Gallon | 2.5 |
Fluid Inlet Size (in) | 1.5 |
Fluid Inlet Size (mm) | 38.1 |
Fluid Inlet Thread Type | Sanitary Quick Clamp |
Fluid Outlet Size (in) | 1.5 |
Fluid Outlet Size (mm) | 38.1 |
Fluid Outlet Thread Type | Sanitary Quick Clamp |
Fluid Section Type | Sealed 4-Ball |
Includes | Basic Controls, Wall Mount |
Input Voltage (V AC) | 380 - 480 |
Lower Type | Sealed 4-Ball |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (cpm) | 20 |
Maximum Flow Rate (l/min) | (8 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°C) | 40 |
Maximum Working Pressure (MPa) | 3.1 |
Maximum Working Pressure (bar) | 31 |
Maximum Working Pressure (kPa) | 3102.8 |
Maximum Working Pressure (psi) | 450 |
Minimum Operating Temperature (°C) | 0 |
Model | E-Flo |
Motor Type | AC |
Output Per Cycle (cm³) | 1500 |
Portable | Non-Portable |
Series | Dci 4-Ball |
Type | Electric Piston Pump |