Graco Inc.

EcoQuip 2 EQs  Vapor Abrasive Blast Equipment

Truck-ready, high performance, industrial-grade abrasive blaster

Where to BuyRequest Info
Share |
Blasting_line_removal.tif

Graco’s EcoQuip 2 EQs vapor blasting equipment is a standalone unit designed to tackle most typical blasting projects. The EQs is built according to tough standards and can be stacked safely in a warehouse.

EQs Features and Benefits:

  • Fits inside a six-foot truck bed for easy transport
  • Stacks easily to save space
  • Max blast pressure of 175 PSI
  • Handles both low and high air flow/pressure applications
  • Painted crash frame
  • 6.5 cubic ft. specialty coated pot

 

 

 

 

Vapor Abrasive Blasting: A cleaner, easier path to profitable results

  • Generates less dust - 92 percent less airborne dust than dry blasting
  • Uses less water than slurry or traditional wet abrasive blasting
  • Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust
  • Uses less media which equals less containment and cleanup

 

Manuals

Literature

Other Resources

View values in metric units. View values in U.S. units.



EcoQuip 2 EQs and EQs Elite
Maximum Fluid Working Pressure
175 psi
12.1 bar, 1.21 MPa
Operating Temperature
35˚ - 110˚ F
1.6˚ - 43.3˚ C
Recommended Compressor Size+
185-900 CFM
5.24-25.5 m^3/min
Blast Hose Size (supplied)
1.25 in. ID
31.75 mm ID
Abrasive Capacity*
880 lb.
400 kg
Dry Weight
1070 lb.
485 kg
Wet Weight*
3120 lb.
1415 kg
Pressure Pot Volume
6.5 cubic feet
184 liters
Water Tank Volume
115 gallon
435 liters
Air Inlet Connection†
1–1/2 npt
– – – – –
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media will decrease weight.
† 2 in. ground boss adapter included in tool box (see the Parts section of the EcoQuip 2 manual for more detail).
Air Supply Hose Minimum ID
185–600 CFM compressor and less than 100 ft. hose length
1.5 in. ID
38 mm ID
Over 600 CFM compressor or greater than 100 ft. hose length
2 in. ID
51 mm ID
Sound Data**
Sound Pressure Level
133 dB(A)
133 dB(A)
Sound Power Level
139 dB(A)
139 dB(A)
Instantaneous Sound Pressure Level
131 dB(C)
131 dB(C)
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2.
+ See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on compressor pressure and flow output specifications.