- New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
- Removes foam and keeps mix chamber clear
- Saves almost an hour of maintenance time each spray day
- First-ever liquid purge – reduces purge air by 75% and minimizes foam blowback
- Easy-to-insert cartridge fits into ergonomic handle
- Variable flow - an industry first
- First plural-component gun with variable flow
- Switch from large to small spray patterns in seconds
- Gives you more maneuverability to spray in small, tight areas
- Ten different settings
- Quick-change front - simpler and cleaner
- Swap out fluid heads in seconds
- Non-stick polymer cover keeps gun head cleaner
- "Air knife" reduces material build-up
- Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule
Fusion CS Plural-Component Spray Gun with ClearShot™ Technology
For high output spray polyurethane foam and polyurea applications
ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.
ClearShot Technology - unprecedented features

Manuals
Literature
- 349104EN, Reactor Parts and Accessories Brochure [other languages]
- 300615ENAP, Fast Set Brochure 2014 [other languages]
- 339583ENAP, Graco Fusion CS Brochure [other languages]
- 349690EN, Fusion CS Gun Parts Kit
- 349890EN, Spray Foam Equipment Brochure
349104EN, Reactor Parts and Accessories Brochure
300615ENAP, Fast Set Brochure 2014
Fusion CS Spray Gun | |
Maximum Fluid Working Pressure |
3500 psi
245 bar, 24.5 MPa
|
Minimum Air Inlet Pressure |
80 psi
5.6 bar, 0.56 MPa
|
Maximum Air Inlet Pressure |
130 psi
9 bar, 0.9 MPa
|
Air Flow Range |
See chart in Instruction Manual
See chart in Instruction Manual
|
Maximum Fluid Temperature |
200°F
94°C
|
Air Inlet Size |
1/4 npt Quick Disconnect Nipple
1/4 npt Quick Disconnect Nipple
|
A Component (ISO) Inlet Size |
-5 JIC; 1/2-20 UNF
-5 JIC; 1/2-20 UNF
|
B Component (Resin) Inlet Size |
-6 JIC; 9/16-18 UNF
-6 JIC; 9/16-18 UNF
|
Sound Pressure |
75.27 dB(A), using RD0202 at 100 psi, (0.7 MPa, 7 bar)
75.27 dB(A), using RD0202 at 100 psi, (0.7 MPa, 7 bar)
|
Sound Power, measured per ISO 9416–2 |
73.45 dB(A), using RD0202 at 100 psi, (0.7 MPa, 7 bar)
73.45 dB(A), using RD0202 at 100 psi, (0.7 MPa, 7 bar)
|
Dimensions |
7.5 x 8.1 x 3.3 in
191 x 206 x 84 mm
|
Weight |
2.6 lbs
1.18 kg
|
Wetted Parts |
Aluminum, stainless steel, carbon steel, carbide, chemically resistant o-rings
Aluminum, stainless steel, carbon steel, carbide, chemically resistant o-rings
|
-
Bridge Protective Coatings
Sprayers for protective coating bridge applications
-
Roof and Wall Insulation
Equipment for spraying foam insulation into residential and commercial buildings
-
Air Sealing Attics and Rim Joists
Easily seal and insulate rim joists, or create an air barrier under blown-in insulat...
Accessories
-
Fusion Air Purge
For high output spray polyurethane foam and polyurea applications
-
Fusion Mechanical Purge
For high output spray polyurethane foam and polyurea applications
-
Probler P2
For high output spray polyurethane foam and polyurea applications
-
Reactor Heated Hose
For Reactor proportioners
-
T1, T2 and T3 Transfer Pumps
Ideal for moving A and B materials to Reactor spray machines
-
Twistork Agitators
For mixing fluids in closed drums
-
Xtreme-Duty Hose
For high-pressure spraying applications
Related Products
-
Reactor 2 E-30
Next generation technology for spray foam insulation and polyurea
-
Reactor 2 E-30i
Turnkey system for spray foam insulation and coating - applies up to 30 lb (13.6 kg) per minute
-
Reactor 2 E-XP2i
Turnkey system for polyurea waterproof coating and lining - applies up to 2 gal (7.6 liters) per minute
-
Reactor A-25
For spraying foam insulation - applies up to 25 lb (11.4 kg) per minute
-
Reactor E-10
For smaller polyurethane foam or polyurea projects or touch-ups - applies up to 12 lb (5.4 kg) per minute
-
Reactor E-10hp
Entry-level system for pure and hybrid polyurea coatings
-
Reactor E-20
For low- to medium-output foam insulation applications - applies up to 20 lb (9 kg) per minute
-
Reactor E-XP1
For polyurea coatings - applies up to 2 gal (7.6 liters) per minute
-
Reactor H-25, H-40 and H-50
For medium to high-output foam applications and roofing projects - applies up to 52 lb (23...
-
Reactor H-XP2 and H-XP3
For coatings that require high-pressures - applies up to 2.8 gal (10.6 liters) per minute