Our improved tip line delivers a high quality finish for a variety of applications. Plus, the pre-orifice tips atomize paints for fine finish applications. Pro Xp85 Air-Assist gun line includes Standard and Smart models.
Pro Xp85 AA Electrostatic Spray Guns Electrostatic Air-Assist Guns Deliver Expert Performance
Pro Xp85 kV air-assist gun maximizes transfer efficiency and lowers cost of ownership

- High quality spray performance with a one-piece aircap and a variety of tips
- Electrostatic guns are easier to adjust with larger control knobs
- Alternator speed indicator light ensures your turbine speed is running at the correct level
- Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
- Increase transfer efficiency up to 10%
- Made in the USA
- Internal power supply reduces operator fatigue with no heavy cords to slow you done
- Rugged, dependable design supported by a three year warranty
- Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements
Manuals
Literature
- 345007EN Pro Xp Electrostatic Gun Brochure [other languages]
- 340004EN Merkur High Performance Fine Finish Packages [other languages]
345007EN Pro Xp Electrostatic Gun Brochure
Electrostatic Air-Assisted Spray Guns | |
Maximum Working Fluid Pressure |
3000 psi
21 MPa, 210 bar
|
Maximum Working Air Pressure |
100 psi
0.7 MPa, 7.0 bar
|
Minimum Air Pressure at Gun Inlet |
45 psi
0.32 MPa, 3.2 bar
|
Maximum Fluid Operating Temperature |
120°F
48°C
|
Paint Resistivity Range |
3 megohm/cm to infinity
3 megohm/cm to infinity
|
Air Inlet Fitting |
1/4 npsm(m) left-hand thread
1/4 npsm(m) left-hand thread
|
Fluid Inlet Fitting |
1/4–18 npsm(m)
1/4–18 npsm(m)
|
Output Voltage |
Pro Xp60 Models: 60 kV. Pro Xp85 Models: 85 kV
Pro Xp60 Models: 60 kV. Pro Xp85 Models: 85 kV
|
Maximum Current Draw |
125 microamperes
125 microamperes
|
Sound Power (measured per ISO Standard 9216) |
at 40 psi: 88.9 dB(A) at 100 psi: 99.7 dB(A)
at 0.28 MPa, 2.8 bar: 88.9 dB(A) at 0.7 MPa, 7.0 bar: 99.7 dB(A)
|
Sound Pressure (measured 1 m from gun) |
at 40 psi: 86.0 dB(A) at 100 psi: 95.0 dB(A)
at 0.28 MPa, 2.8 bar: 86.0 dB(A) at 0.7 MPa, 7.0 bar: 95.0 dB(A)
|
Wetted Parts |
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene
|
-
Agriculture Equipment - Manufacturing
-
Spray Booths
-
Construction Equipment - Manufacturing
-
CARC
-
Automotive Electronics
-
Consumer Electronics
-
Furniture Finishing / Manufacturing
-
General Metal Finishing / Manufacturing
-
Wood Products Manufacturing
-
Marine
-
Railroads
-
Trucking
-
Fleets
-
Waste Management - Equipment Manufacturing
-
Personal Recreation Vehicles
-
RVs
-
Aerospace - Finishing
-
Heavy Equipment Manufacturing
-
Forestry Equipment
Related Products
-
Merkur Air-Assist and Airless Packages
Airless and air-assisted fine finish pump packages to improve productivity, red...
-
Pro Xp60 AA Electrostatic Spray Guns
Pro Xp60 kV air-assist gun is the smallest and lightest electrostatic air-assist ...
-
Pro Xp85 Electrostatic Spray Guns
Pro Xp85 kV air spray gun maximizes transfer efficiency and lowers cost of ownership