APEX Transfer Pumps Electrical Powered Pumps and Packages

Self priming, positive displacement design

Waar te koop Informatie aanvragen

Delen |

Graco’s APEX transfer pumps are designed specifically to transfer bulk oils and hydraulic fluids anywhere.

Available with 12 VDC, 115 VAC and 230 VAC electric motors
Self-priming, positive displacement design
Pumps petroleum- and synthetic-based lubricants up to 8 gpm (30 lpm)
Built-in bypass valve
Transfer used oil with inlet suction screen ( 260306)
TENV electric motor for demanding environments, models 260105, 260106, 260108 and 260109
System includes suction tube, fluid hose, dispense valve and bung adapter for models 260100, 260101, 260102 and 260104

APEX Oil Transfer Pump
Maximum Working Pressure	65 psi 4.5 bar, 0.45 MPa
Automatic Relief Setting
Models 260100, 260101, 260104:	65 psi 4.5 bar, 0.45 MPa
Model 260102:	30 psi 2.1 bar, 0.21 MPa
Output Flow
Model 260100:	5.8 gpm 22.0 lpm
Model 260101:	4.25 gpm 16.15 lpm
Model 260102: (Model 260102 is intended for use with fluid viscosities of 1000 centistokes (5000 ssu) or less.For fluids with viscosities greater than 1000 centistokes use pump model 260101.)	8.0 gpm 30.3 lpm
Model 260104:	4.25 gpm 16.15 lpm
Inlet Size	1 in npt 1 in npt
Outlet Size	3/4 in npt 3/4 in npt
Weight
Model 260100:	34 lb 15.3 kg
Models 260101, 260102, 260104:	25 lb 11.25 kg
Voltage/Curren
Model 260100:	12 VDC, 35 amps 12 VDC, 35 amps
Models 260101, 260102:	115 VAC, 60 Hz, 9.2 amps 115 VAC, 60 Hz, 9.2 amps
Model 260104:	230 VAC, 50/60 Hz, 4 amps 230 VAC, 50/60 Hz, 4 amps
Power Cord
Model 260101, 260102 only:	30 in 762 mm
Hose Size	8 ft, 3/4 in ID 2.4 m, 19 mm ID
Suction Tube	34 in 864 mm
Wetted Parts	carbon steel with zinc plating, stainless steel, galvanized steel, aluminum, nitrile, rubber, PVC, PVC cement carbon steel with zinc plating, stainless steel, galvanized steel, aluminum, nitrile, rubber, PVC, PVC cement