Reactor E-10hp |
Maximum fluid working pressure |
3000 psi
20.6 MPa, 206 bar
|
Maximum spray pressure: 120 V |
2200 psi
15.2 MPa, 152 bar
|
Maximum spray pressure: 230 V |
2500 psi
17.2 MPa, 172 bar
|
Maximum fluid temperature |
170°F
77°C
|
Maximum ambient temperature |
120°F
48°C
|
Maximum output |
1 gal/min
3.8 liters/min
|
Output per cycle (ISO and RES) |
0.0038 gallons/cycle
0.014 liters/cycle
|
Air inlet |
1/4 in. quick-disconnect industrial type pin fitting
1/4 in. quick-disconnect industrial type pin fitting
|
Air outlet |
1/4 npsm(m)
1/4 npsm(m)
|
Overpressure relief |
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
|
Gun compressed air requirements |
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
|
Maximum hose length |
105 ft
32 m
|
Tank capacity each (nominal) |
6 gal
22.7 liters
|
Weight (empty) |
239 lb
108 kg
|
Fusion® Air Purge |
000, AW2222 (00 and 01 at reduced spray pressure)
000, AW2222 (00 and 01 at reduced spray pressure)
|
Probler® P2 |
AA (00 and 01 at reduced spray pressure)
AA (00 and 01 at reduced spray pressure)
|
120 V |
120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
|
230 V |
230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
|
120 V |
5000 W minimum
5000 W minimum
|
230 V |
7500 W minimum
7500 W minimum
|
120 V |
3000 W during recirculation, 2000 W during pressure spray mode
3000 W during recirculation, 2000 W during pressure spray mode
|
230 V |
4000 W during recirculation, 2760 W during pressure spray mode
4000 W during recirculation, 2760 W during pressure spray mode
|
In fast recirculation mode |
71.3 dB(A)
71.3 dB(A)
|
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm) |
85.6 dB(A)
85.6 dB(A)
|
In fast recirculation mode |
79.9 dB(A)
79.9 dB(A)
|
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm) |
93.3 dB(A)
93.3 dB(A)
|
ISO Side |
-5 JIC male
-5 JIC male
|
RES Side |
-6 JIC male
-6 JIC male
|
ISO side |
-5 JIC male
-5 JIC male
|
RES side |
-6 JIC male
-6 JIC male
|
ISO side |
Red
Red
|
RES side |
Blue
Blue
|
Wetted parts on all models |
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
|
Reactor E-10hp |
Maximum fluid working pressure | 3000 psi 20.6 MPa, 206 bar |
Maximum spray pressure: 120 V | 2200 psi 15.2 MPa, 152 bar |
Maximum spray pressure: 230 V | 2500 psi 17.2 MPa, 172 bar |
Maximum fluid temperature | 170°F 77°C |
Maximum ambient temperature | 120°F 48°C |
Maximum output | 1 gal/min 3.8 liters/min |
Output per cycle (ISO and RES) | 0.0038 gallons/cycle 0.014 liters/cycle |
Air inlet | 1/4 in. quick-disconnect industrial type pin fitting 1/4 in. quick-disconnect industrial type pin fitting |
Air outlet | 1/4 npsm(m) 1/4 npsm(m) |
Overpressure relief | Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks |
Gun compressed air requirements | Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min) Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min) |
Maximum hose length | 105 ft 32 m |
Tank capacity each (nominal) | 6 gal 22.7 liters |
Weight (empty) | 239 lb 108 kg |
|
Fusion® Air Purge | 000, AW2222 (00 and 01 at reduced spray pressure) 000, AW2222 (00 and 01 at reduced spray pressure) |
Probler® P2 | AA (00 and 01 at reduced spray pressure) AA (00 and 01 at reduced spray pressure) |
|
120 V | 100–120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit 100–120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit |
230 V | 200–230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit. 200–230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit. |
|
120 V | 5000 W minimum 5000 W minimum |
230 V | 7500 W minimum 7500 W minimum |
|
120 V | 3000 W during recirculation, 2000 W during pressure spray mode 3000 W during recirculation, 2000 W during pressure spray mode |
230 V | 4000 W during recirculation, 2760 W during pressure spray mode 4000 W during recirculation, 2760 W during pressure spray mode |
|
In fast recirculation mode | 71.3 dB(A) 71.3 dB(A) |
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm) | 85.6 dB(A) 85.6 dB(A) |
|
In fast recirculation mode | 79.9 dB(A) 79.9 dB(A) |
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm) | 93.3 dB(A) 93.3 dB(A) |
|
ISO Side | -5 JIC male -5 JIC male |
RES Side | -6 JIC male -6 JIC male |
|
ISO side | -5 JIC male -5 JIC male |
RES side | -6 JIC male -6 JIC male |
|
ISO side | Red Red |
RES side | Blue Blue |
|
Wetted parts on all models | Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene |
|