固瑞克 e-Xtreme 电动无气喷涂机是世界上首款适用于防护性涂料的电动喷涂机,经批准可用于危险场所。e-Xtreme 电源要求更低、便于使用且易于得到,能够改善作业现场由于空压机气量不够而导致的低工作效率。如果空压机发生故障,不会再造成停产。此外,电动技术还能够消除脉动和马达结冰问题,从而始终确保作业顺利进行!
e-Xtreme 电动无气喷涂机 用于保护涂层的电动无气喷涂机
世界上首款适用于易爆炸环境的防护性涂料的电动喷涂机

了解为何这位专业油漆工喜欢 e-Xtreme 电动无气喷涂机
“该设备并不像气动泵那样换向振动,运行更稳定。无论使用哪种类型的喷嘴,始终都能得到良好的喷幅。”
- Dean Stewart,钢铁厂
了解为什么e-Xtreme喷涂机是您喷涂防护涂料的电动解决方案

- 电动
- 电源安全、可靠且方便
- 不结冰
- 非气动马达 = 不再有结冰问题
- 减少噪音
- 与气动马达相比,明显更加安静
- 插电即可喷涂
- 240V/16A 电源确保平滑、低脉动喷涂
- 可用于危险场所
- ATEX、IECEx 和 1 级 1 类审批*
- 节能
- 与气动喷涂机相比,节省高达 80% 的能源成本**
*有关危险场所批准的详细信息以及合适的布线要求,请参见产品手册。**测试表明,在 241 bar (3500 psi) 的工作压力下可完成时长 20 小时/周;使用 XHD519 喷嘴可喷涂 324 加仑 (1.226 l) 含固量为 73% 的环氧涂料。
应用
- 化工厂
- 厂内油漆车间
- 船舶
- 金属制造
- 轨道
- 精炼厂和沿海地区
- 储油罐
- 结构钢
- 水和废水涂料
申请免费演示
免费。 没有义务。
在下面注册

特性:
- 插电即可喷涂 - 无需压缩机
- 非气动马达意味着不会结冰
- 安静运行,减轻声音困扰
- 可用于危险场所 - 首例
- 动力充足,足够用于所有类型的应用
- 3 年延保
手册
- 3A3164E, Manual, e-Xtreme Sprayer, Instructions, English [其他语言]
- 3A3165G, Manual, e-Xtreme Driver, Instructions, English [其他语言]
- 3A5124B, Manual, e-Xtreme Driver, Instructions, English [其他语言]
3A3164E, Manual, e-Xtreme Sprayer, Instructions, English
3A3165G, Manual, e-Xtreme Driver, Instructions, English
资料
Ex35 e-Xtreme Sprayers | |
Maximum fluid working pressure | 3500 psi 240 bar, 24.0 MPa |
Stroke length | 4.75 in. 120 mm |
Maximum continuous cycle rate | 44 cycles per minute 44 cycles per minute |
Tip Size | .023 in. .023 in. |
Weight | 295 lb 135 kg |
Wetted parts | Carbon Steel, Alloy Steel, 304, 440 and 17–PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum Carbon Steel, Alloy Steel, 304, 440 and 17–PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum |
Operating temperature range | 23° to 120° F -5° to 50° C |
Input voltage | 200–240 VAC, single phase, 50/60 Hz 200–240 VAC, single phase, 50/60 Hz |
Input power | 2.5 kVA 2.5 kVA |
Minimum Recommended generator size | 5 kW 5 kW |
Oil capacity | 1.0–1.2 quarts 0.9–1.1 liters |
Oil specification | Graco part number 16W645 silicone-free ISO 220 synthetic EP gear oil Graco part number 16W645 silicone-free ISO 220 synthetic EP gear oil |
Inlet / Outlet Sizes | |
Fluid inlet size | 1 in. npt(m) [also includes 1 in. nps(swivel) to 1 in. npt(m) adapter elbow] 1 in. npt(m) [also includes 1 in. nps(swivel) to 1 in. npt(m) adapter elbow] |
Fluid outlet size | 1/2 npt(m) [also includes 1/2 npt(f) to 3/8 npt(m) adapter] 1/2 npt(m) [also includes 1/2 npt(f) to 3/8 npt(m) adapter] |
Hose Requirements | |
Minimum pressure | The minimum hose pressure rating should be equal to or greater than the maximum fluid working pressure of sprayer The minimum hose pressure rating should be equal to or greater than the maximum fluid working pressure of sprayer |
Minimum length | 50 ft. 15 m |
Minimum ID | 3/8 in. 10mm |
Maximum resistance per ISO 8028 | 9,100 ohms/ft 30,000 ohms/m |
Sound Emissions (per ISO 9614) for Normal Operation (Spraying @ 20 cpm) | |
Sound Pressure LpA Average | 70.2 dBA 70.2 dBA |
Sound Power LwA Total Power | 76.7 dBA 76.7 dBA |
Sound Emissions (per ISO 9614) for Maximum Speed (Flushing @ 44 cpm) | |
Sound Pressure LpA Average | 77.4 dBA 77.4 dBA |
Sound Power LwA Total Power | 85.1 dBA 85.1 dBA |
Ex45 e-Xtreme Sprayers | |
Maximum fluid working pressure | 4500 psi 310 bar, 31.0 MPa |
Stroke length | 4.75 in. 120 mm |
Maximum continuous cycle rate | 44 cycles per minute 44 cycles per minute |
Tip Size | .021 in. .021 in. |
Weight | 295 lb 135 kg |
Wetted parts | Carbon Steel, Alloy Steel, 304, 440 and 17–PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum Carbon Steel, Alloy Steel, 304, 440 and 17–PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum |
Operating temperature range | 23° to 120° F -5° to 50° C |
Input voltage | 200–240 VAC, single phase, 50/60 Hz 200–240 VAC, single phase, 50/60 Hz |
Input power | 2.5 kVA 2.5 kVA |
Minimum Recommended generator size | 5 kW 5 kW |
Oil capacity | 1.0–1.2 quarts 0.9–1.1 liters |
Oil specification | Graco part number 16W645 silicone-free ISO 220 synthetic EP gear oil Graco part number 16W645 silicone-free ISO 220 synthetic EP gear oil |
Inlet / Outlet Sizes | |
Fluid inlet size | 1 in. npt(m) [also includes 1 in. nps(swivel) to 1 in. npt(m) adapter elbow] 1 in. npt(m) [also includes 1 in. nps(swivel) to 1 in. npt(m) adapter elbow] |
Fluid outlet size | 1/2 npt(m) [also includes 1/2 npt(f) to 3/8 npt(m) adapter] 1/2 npt(m) [also includes 1/2 npt(f) to 3/8 npt(m) adapter] |
Hose Requirements | |
Minimum pressure | The minimum hose pressure rating should be equal to or greater than the maximum fluid working pressure of sprayer The minimum hose pressure rating should be equal to or greater than the maximum fluid working pressure of sprayer |
Minimum length | 50 ft. 15 m |
Minimum ID | 3/8 in. 10mm |
Maximum resistance per ISO 8028 | 9,100 ohms/ft 30,000 ohms/m |
Sound Emissions (per ISO 9614) for Normal Operation (Spraying @ 20 cpm) | |
Sound Pressure LpA Average | 70.2 dBA 70.2 dBA |
Sound Power LwA Total Power | 76.7 dBA 76.7 dBA |
Sound Emissions (per ISO 9614) for Maximum Speed (Flushing @ 44 cpm) | |
Sound Pressure LpA Average | 77.4 dBA 77.4 dBA |
Sound Power LwA Total Power | 85.1 dBA 85.1 dBA |