Graco Inc.

Fusion AP 喷枪  双组份喷枪

适用于聚氨酯发泡与聚脲的高输出量应用

购买地点小帮手咨询信息

Fusion AP 喷枪采用使用寿命更长的混合室与侧密封,减少了维护与停工时间,混合效果更佳。

Fusion Air Purge
  • 空气吹洗清洁喷嘴可以避免结垢和喷嘴堵塞
  • 使用寿命更长的侧密封可减少停工维护
  • 快速拆卸的流体壳体,不需要工具即可轻松更换混合室
  • 手工拧紧前帽,不需要工具即可清洁和维护密封件和混合室
  • 人机工程学手柄

Fusion Plural Component Impingement Mix Air Purge Spray Gun
Maximum Fluid Working Pressure
3500 psi
245 bar, 24.5 MPa
Minimum Air Inlet Pressure
80 psi
5.6 bar, 0.56 MPa
Maximum Air Inlet Pressure
130 psi
9 bar, 0.9 MPa
Air Flow Range
See chart in instruction manual.
See chart in instruction manual.
Typical Flow Rate of Round Pattern Guns
See chart in instruction manual.
See chart in instruction manual.
Typical Flow Rate of Flat Pattern Guns
See chart in instruction manual.
See chart in instruction manual.
Maximum Fluid Temperature
200°F
94°C
Air Inlet Size
1/4 npt Quick Disconnect Nipple
1/4 npt Quick Disconnect Nipple
A Component (ISO) Inlet Size
-5 JIC; 1/2-20 UNF
-5 JIC; 1/2-20 UNF
B Component (Resin) Inlet Size
-6 JIC; 9/16-18 UNF
-6 JIC; 9/16-18 UNF
Sound Pressure
81.1 dB(A), using AR5252 at 100 psi (0.7 MPa, 7 bar)
81.1 dB(A), using AR5252 at 100 psi (0.7 MPa, 7 bar)
Sound Power, measured per ISO 9416–2
91.0 dB(A), using AR5252 at 100 psi (0.7 MPa, 7 bar)
91.0 dB(A), using AR5252 at 100 psi (0.7 MPa, 7 bar)
Dimensions
7.5 x 8.1 x 3.3 in
191 x 206 x 84 mm
Weight
2.5 lb
1.1 kg
Wetted Parts
Aluminum, stainless steel, carbon steel, carbide, chemically resistant o-rings
Aluminum, stainless steel, carbon steel, carbide, chemically resistant o-rings