Graco Inc.

Fusion MP 喷枪  双组份喷枪

适用于聚氨酯泡沫与聚脲涂料喷涂作业大量输出应用

购买地点小帮手咨询信息

无论是喷涂聚脲涂料还是发泡保温,Fusion MP 喷枪都能游刃有余。 其坚固耐用的设计提供了良好的混合与涂料性能表现——带给您最佳的作业效果。

Fusion Mechanical Purge Main Needs
  • 便于进行机械清理——混合模块和喷嘴可使用钻头进行清洁
  • 长效 PolyCarballoy 混合模块
  • 先进的混合模块与喷嘴,提供先进的混合功能

Fusion Plural Component, Impingement Mix Mechanical Purge Spray Gun
Maximum Fluid Working Pressure
3500 psi
24.2 MPa, 242 bar
Minimum Air Inlet Pressure
80 psi
0.55 MPa, 5.5 bar
Maximum Air Inlet Pressure
130 psi
0.9 MPa, 9 bar
Maximum Fluid Temperature
200°F
94°C
Air Inlet Size
1/4 npt Quick Disconnect Nipple
1/4 npt Quick Disconnect Nipple
A Component (ISO) Inlet Size
-5 JIC; 1/2-20 UNF
-5 JIC; 1/2-20 UNF
B Component (Resin) Inlet Size
-6 JIC; 9/16-18 UNF
-6 JIC; 9/16-18 UNF
Typical Flow rate
See charts in instruction manual
See charts in instruction manual
Sound Pressure
70 dB(A), at 100 psi (0.7 MPa, 7 bar)
70 dB(A), at 100 psi (0.7 MPa, 7 bar)
Sound Power, measured per ISO 9416–2
79.9 dB(A), at 100 psi (0.7 MPa, 7 bar)
79.9 dB(A), at 100 psi (0.7 MPa, 7 bar)
Length
7.6 in.
193 mm
Height
8.1 in.
206 mm
Width
3.1 in.
79 mm
Weight
2.9 lb
1.32 kg
Wetted Parts
Aluminum, stainless steel, carbon steel, chemically resistant o-rings, ultra-high molecular weight polyethylene (UHMWPE), Polycarballoy™, CeramTip™
Aluminum, stainless steel, carbon steel, chemically resistant o-rings, ultra-high molecular weight polyethylene (UHMWPE), Polycarballoy™, CeramTip™