Graco Inc.

Hydra-Cat HP  机械配比器

可调比例配比器,适用于高性能涂层

购买地点小帮手咨询信息

Hydra-Cat HP 是高功率的可调比例配比器,专门用于为大型户外结构件涂敷高固体份的保护涂层,包括船舶和近海结构件。也可将 Hydra-Cat HP 整合到定制设计的双组份系统中。

查看您的 Hydra-Cat 是否有更新产品?参见 Graco 的 XP 双组份喷涂机系列。

  • 轻松调节比例,无需更换泵下缸体
  • Premier 或 King 气动马达的首选
  • Dura-Flo 流体部分兼容
  • 使用寿命长,易于保养的 Xtreme 泵下缸体
  • 独立设计,便于整合到一个系统中

Hydra-Cat H.P. Variable Ratio Proportioning Pump
Air motor effective diameter
Premier
12.64”
321 mm
King
10.00”
254 mm
Air motor stroke
4.75”
120 mm
Operating air pressure range
20 to 100 psi
1.4 to 7 bar
Recommended pump speed
40 cycles per minute maximum
40 cycles per minute maximum
Maximum fluid inlet pressure
25% of Output or 1000 psi max.
25% of Output or 1000 psi max.
Maximum pump operating temperature
180°F
82°C
Wetted parts
Carbon Steel Models, Primary and secondary displacement pumps
Carbon Steel; Chrome Steel; Alloy Steel; Chrome, Zinc, and Nickel Plating; 550 and 17-4 PH Grades of Stainless Steel; Ductile Iron; Tungsten Carbide; PTFE; Glass-Filled PTFE; Leather
Carbon Steel; Chrome Steel; Alloy Steel; Chrome, Zinc, and Nickel Plating; 550 and 17-4 PH Grades of Stainless Steel; Ductile Iron; Tungsten Carbide; PTFE; Glass-Filled PTFE; Leather
Stainless Steel Models, Primary and secondary displacement pumps
316, 440 and 17-4 PH Grades of Stainless Steel; Tungsten Carbide; PTFE; Glass-Filled PTFE; Leather
316, 440 and 17-4 PH Grades of Stainless Steel; Tungsten Carbide; PTFE; Glass-Filled PTFE; Leather
All Models Fluid hoses
Nylon, Zinc-plated steel couplings
Nylon, Zinc-plated steel couplings
All Models Pressure relief valves
304 Stainless Steel, Graphite-filled PTFE Tungsten carbide (Nickel binder)
304 Stainless Steel, Graphite-filled PTFE Tungsten carbide (Nickel binder)
Premier Noise level at 90 psi (6.3 bar) inlet air and at 40 cpm maximum load
86 dB(A)
86 dB(A)
King Noise level at 90 psi (6.3 bar) inlet air and 15 cpm maximum load
90.5 dB(A) Pressure, 97.7 dB(A) Power
90.5 dB(A) Pressure, 97.7 dB(A) Power