Graco Inc.

Reactor 2 E-30  聚氨酯发泡和聚脲喷涂设备

聚氨酯发泡和聚脲喷涂的新一代技术

购买地点小帮手咨询信息

为您的业务运营方式带来突破性变革


Reactor 2 各项功能的设计目标是要从战略上提升喷涂业务水平,包含多项创新,可帮助您顺利执行喷涂业务。软件和硬件改进旨在提供更好的喷涂性能。新技术可帮助提升经济效益

Reactor 2 E-30

  • 结构紧凑 – 比传统 Reactor E-30TM 占地面积缩减 40%
  • 人体工学设计 – 易于维修
  • 先进的控制技术
  • 比传统 Reactor 更出色的喷涂性能
  • 采用二维码技术快速轻松地排除故障

Graco InSite™

  • 更好的控制 – 借助固瑞克 InSite™ 远程报告技术,您可以随时随地掌控业务
  • 更好的记录 – 自动收集作业日志数据和喷涂参数,您可借此确认喷涂作业是否符合规范
  • 更出色的团队和人员管理
  • 更理想的成本控制和预测
  • Reactor 2 Elite 标配 Graco InSite

  • 先进的控制技术
    • 跟踪、监控和保存项目数据
    • 可将数据下载到 USB 驱动器用于进一步分析
    • 存储多达 24 种条目
    • 料桶液位指示器
  • 固瑞克 InSite 远程报告技术
    • 传输实时作业活动,供您在智能手机、平板电脑或电脑上查看
    • 让您无论身在何处皆可掌控业务
  • 以二维码快捷方式在屏幕上显示故障情况,方便在线查看故障排除信息
    • 减少停机时间
  • 易于检修、便于放置的电子装置
  • 先进的控制模块
    • 先进的控制
  • 牺牲性电涌保护器
    • 避免电子装置功率峰值过高
  • 与液压设备相同的平滑、均匀的喷涂效果
  • 三年质保
    • 涵盖用户显示模块、控制板和电机
    • 行业领先

Reactor 2 E-30 and E-XP2 Proportioning System
Maximum Fluid Working Pressure
E-30
2000 psi
14 MPa, 140 bar
E-XP2
3500 psi
24.1 MPa, 241 bar
Maximum Fluid Temperature
E-30
190°F
88°C
E-XP2
190°F
88°C
Maximum Flow Rate
E-30
30 lb/min
13.5 kg/min
E-XP2
2 gpm
7.6 lpm
Maximum Heated Hose Length
Length
310 ft
94 m
Output per Cycle, ISO and RES
E-30
0.0272 gal.
0.1034 liter
E-XP2
0.0203 gal.
0.0771 liter
Operating Ambient Temperature Range
Temperature
20° to 120°F
-7° to 49°C
Line Voltage Requirement
Nominal 200–240 VAC, 1 Phase, 50/60 Hz
195–265 VAC
195–265 VAC
Nominal 200–240 VAC, 3 phase, DELTA, 50/60 Hz
195–265 VAC
195–265 VAC
Nominal 350–415 VAC, 3 phase, WYE, 50/60 Hz
340–455 VAC
340–455 VAC
Heater Power, (at 230 VAC rated voltage)
E-30 10 kW
10,200 Watts
10,200 Watts
E-30, 15 kW
15,300 Watts
15,300 Watts
E-XP2 15 kW
15,300 Watts
15,300 Watts
Sound Pressure, Sound Pressure measured per ISO-9614–2.
E-30, Measured from 3.1 ft (1 m), at 1000 psi (7 MPa, 70 bar), 3 gpm (11.4 lpm)
87.3 dBA
87.3 dBA
E-XP2, Measured from 3.1 ft (1 m), at 3000 psi (21 MPa, 207 bar), 1 gpm (3.8 lpm)
79.6 dBA
79.6 dBA
Sound Power
E-30, Measured from 3.1 ft (1 m), at 1000 psi (7 MPa, 70 bar), 3 gpm (11.4 lpm)
93.7 dBA
93.7 dBA
E-XP2, Measured from 3.1 ft (1 m), at 3000 psi (21 MPa, 207 bar), 1 gpm (3.8 lpm)
86.6 dBA
86.6 dBA
Fluid Inlets
Component A ISO) and Component B (RES)
3/4 NPT(f) with 3/4 NPSM(f) union
3/4 NPT(f) with 3/4 NPSM(f) union
Fluid Outlets
Component A (ISO)
#8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter
#8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter
Component B (RES)
#10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
#10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
Size
1/4 NPSM(m)
1/4 NPSM(m)
Maximum Pressure
250 psi
1.75 MPa, 17.5 bar
Dimensions
Width
26.3 in.
668 mm
Height
63 in.
1600 mm
Depth
15 in.
381 mm
Weight
E-30, 10 kW
315 lb
143 kg
E-30, 15 kW
350 lb
159 kg
E-30, 10 kW Elite
320 lb
145 kg
E-30, 15 kW Elite
355 lb
161 kg
E-XP2
345 lb
156 kg
E-XP Elite
350 lb
159 kg
Wetted Parts
Material
Aluminum, stainless steel, zinc plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, zinc plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene