Graco Inc.

Reactor E-10  电动发泡和聚脲配比器

适用于小型聚氨酯发泡或聚脲或接缝充填—— 每分钟可喷涂最多 12 lb (5.4 kg)

购买地点小帮手咨询信息

固瑞克 Reactor E-10 是一款小型便携系统。在不影响性能的前提下快速完成小型作业。固瑞克便携式 E-10 喷嘴是双组份喷涂、填料作业和修理的最佳选择。E-10 自带智能控制器,安装简便、操作简单,是其他配比设备的极佳补充。

Reactor E-10
  • 尺寸小,在工地具有便携性,尤其适用于难以喷涂的区域
  • 一人即可操作,节省时间与资金
  • 可作为现有的喷涂业务的附加设备
  • 功能多样——可用作冷喷涂、热喷涂与发泡等
  • 与一次性发泡系统相比,节省 30% 的涂料成本

小型便携系统,带来可观产出!

  1. 电能需求低,可插入标准插座
  2. 单旋钮操作,直观的开始、停止和数字温度显示
  3. 压力平衡阀,让您易于快速平衡系统压力
  4. 平衡配比功能,消除压力波动,实现一致的喷形
  5. 易于维修的流体部分,减少维护成本,提高生产效率
  6. 电动马达可提高性能,降低操作成本
  7. 独立半透明料桶令成比例喷涂状态一目了然
  8. 加热器与软管为循环材料预热,功率达 2000 瓦

 

Reactor E-10
Maximum Fluid Working Pressure
2000 psi
140 bar, 14 MPa
Maximum Fluid Temperature
160°F
71°C
Maximum Ambient Temperature
110°F
43°C
Maximum Output at 340 cycles/min
12 lb/min
5.4 kg/min
Output per Cycle (A and B)
0.00352 gal
0.0133 liter
Overpressure Relief
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Weight (approximately, depending on model)
160 lb
72 kg
Wetted Parts
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Electrical Requirements
Model AP9570, CS9570:
120 Vac, 1 phase, 50/60 Hz, 3500 W; requires two separate, dedicated 15 A circuits
120 Vac, 1 phase, 50/60 Hz, 3500 W; requires two separate, dedicated 15 A circuits
Model AP9571, CS9571:
240 Vac, 1 phase, 50/60 Hz, 3800 W; requires two separate, dedicated 10 A circuits
240 Vac, 1 phase, 50/60 Hz, 3800 W; requires two separate, dedicated 10 A circuits
Model AP9572, CS9572:
240 Vac, 1 phase, 50/60 Hz, 3800 W; requires a single dedicated 16 A circuit
240 Vac, 1 phase, 50/60 Hz, 3800 W; requires a single dedicated 16 A circuit
Model 249806:
120 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 15 A circuit
120 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 15 A circuit
Model 249808:
240 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 8 A circuit
240 Vac, 1 phase, 50/60 Hz, 1800 W; requires a single dedicated 8 A circuit
Generator Size (for Reactor E-10 only)
Heated:
5000 W minimum
5000 W minimum
Nonheated:
2500 W minimum
2500 W minimum
Heater Power
120V models:
850 W each; 1700 W total
850 W each; 1700 W total
240V models:
1000 W each; 2000 W total
1000 W each; 2000 W total
Sounds Pressure
Fast Circulation Mode:
78.7 dB(A)
78.7 dB(A)
At 2000 psi (14 MPa, 140 bar), 0.72 gpm (2.7 lpm):
84.5 dB(A)
84.5 dB(A)
Sound Power, measured per ISO 9416–2
Fast Circulation Mode:
88.6 dB(A)
88.6 dB(A)
At 2000 psi (14 MPa, 140 bar, 0.72 gpm (2.7 lpm):
94.4 dB(A)
94.4 dB(A)
Tank Capacity (nominal)
7 gal
26.5 liters
Fluid Outlets
Component A (ISO):
-5 JIC male
-5 JIC male
Component B (RES):
-6 JIC male
-6 JIC male
Fluid Circulation Ports
Component A (ISO):
-5 JIC male
-5 JIC male
Component B (RES):
-6 JIC male
-6 JIC male
Air Inlet
1/4 in quick-disconnect industrial type pin fitting
1/4 in quick-disconnect industrial type pin fitting
Air Outlet
1/4 npsm(m)
1/4 npsm(m)
Gun Compressed Air Requirements
Fusion Gun (purge air and operating air):
4 scfm
0.112 m³/min
2K Ultra-Lite Gun with disposable mixer kit, with air spray valve fully open:
14 scfm
0.392 m³/min
2K Ultra-Lite Gun with joint fill kit:
2 scfm
0.056 m³/min
Hose Markings
A Side
Red
Red
B Side
Blue
Blue