Graco Inc.

Reactor E-10hp  High-Pressure Coating Equipment for Polyurea

适用于纯聚脲及复合聚脲涂料的入门级系统

购买地点小帮手咨询信息
20130515_174156_sm

实现聚脲项目业务增长

如果您想要在您的业务中增加聚脲项目,Reactor E-10hp 高压配比器是可以帮助您实现业务增长的智能、价格实惠型投资。

Reactor E-10hp 为您提供喷涂聚脲涂料所需的高压电源和性能。装置轻巧便携 - 凭借民用电力即可运行,无需另购发电机。

启动时间短

系统采用创新的快速加热和隔热箱体,材料升温快,可更为快速地启动和运行。事实上,喷涂准备时间仅为 20 分钟*,而标准型 Reactor E-10 的启动时间超过一小时。参见以下图表。

*对于 240V 型号

 


  • 是中小型工程的理想之选,例如平台、水池、阳台、
  • 水箱、卡车车罩、外壳安全壳和防水
  • 快速加热材料,以便提高生产率
  • 便携、紧凑且易于操作
  • 便于使用
  • 采用标准型住宅电气插座
  • 价格实惠 
 

 

chart_Pres_Flow

T该图表根据压力和所选的混合室确定材料输出。例如:

  • A对于 2200 psi 和 AW2222 混合室,输出接近 0.9 gpm
  • 对于 1800 psi 和 AR2929 混合室,输出接近 1 gpm 
 

 

 

E10h_chart_MaxTemp

利用该图表确定哪一个 Reactor E-10 型号最能满足您的应用需求。此图表可确定达到最终喷涂温度所需的循环时间和箱体温度。

  • 弧线部分表示箱体温度。
  • 垂直线部分表示主加热器的温度变化值。

如需计算所需箱体温度,可使用理想喷涂温度减去温度变化值。

Reactor E-10hp
Maximum fluid working pressure
3000 psi
20.6 MPa, 206 bar
Maximum spray pressure: 120 V
2200 psi
15.2 MPa, 152 bar
Maximum spray pressure: 230 V
2500 psi
17.2 MPa, 172 bar
Maximum fluid temperature
170°F
77°C
Maximum ambient temperature
120°F
48°C
Maximum output
1 gal/min
3.8 liters/min
Output per cycle (ISO and RES)
0.0038 gallons/cycle
0.014 liters/cycle
Air inlet
1/4 in. quick-disconnect industrial type pin fitting
1/4 in. quick-disconnect industrial type pin fitting
Air outlet
1/4 npsm(m)
1/4 npsm(m)
Overpressure relief
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Gun compressed air requirements
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
Maximum hose length
105 ft
32 m
Tank capacity each (nominal)
6 gal
22.7 liters
Weight (empty)
239 lb
108 kg
<b >Recommended Mix Chamber Sizes
Fusion® Air Purge
000, AW2222 (00 and 01 at reduced spray pressure)
000, AW2222 (00 and 01 at reduced spray pressure)
Probler® P2
AA (00 and 01 at reduced spray pressure)
AA (00 and 01 at reduced spray pressure)
<b >Electrical Requirements
120 V
120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
230 V
230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
Generator Size
120 V
5000 W minimum
5000 W minimum
230 V
7500 W minimum
7500 W minimum
Heater Power
120 V
3000 W during recirculation, 2000 W during pressure spray mode
3000 W during recirculation, 2000 W during pressure spray mode
230 V
4000 W during recirculation, 2760 W during pressure spray mode
4000 W during recirculation, 2760 W during pressure spray mode
Sound Pressure
In fast recirculation mode
71.3 dB(A)
71.3 dB(A)
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm)
85.6 dB(A)
85.6 dB(A)
Sound Power Sound power measured per ISO-9614-2.
In fast recirculation mode
79.9 dB(A)
79.9 dB(A)
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm)
93.3 dB(A)
93.3 dB(A)
Fluid Outlets
ISO Side
-5 JIC male
-5 JIC male
RES Side
-6 JIC male
-6 JIC male
Fluid Circulation Returns
ISO side
-5 JIC male
-5 JIC male
RES side
-6 JIC male
-6 JIC male
Hose Markings
ISO side
Red
Red
RES side
Blue
Blue
Wetted Parts
Wetted parts on all models
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.



Reactor E-10hp
Maximum fluid working pressure
3000 psi
20.6 MPa, 206 bar
Maximum spray pressure: 120 V
2200 psi
15.2 MPa, 152 bar
Maximum spray pressure: 230 V
2500 psi
17.2 MPa, 172 bar
Maximum fluid temperature
170°F
77°C
Maximum ambient temperature
120°F
48°C
Maximum output
1 gal/min
3.8 liters/min
Output per cycle (ISO and RES)
0.0038 gallons/cycle
0.014 liters/cycle
Air inlet
1/4 in. quick-disconnect industrial type pin fitting
1/4 in. quick-disconnect industrial type pin fitting
Air outlet
1/4 npsm(m)
1/4 npsm(m)
Overpressure relief
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Gun compressed air requirements
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
Maximum hose length
105 ft
32 m
Tank capacity each (nominal)
6 gal
22.7 liters
Weight (empty)
239 lb
108 kg
Recommended Mix Chamber Sizes
Fusion® Air Purge
000, AW2222 (00 and 01 at reduced spray pressure)
000, AW2222 (00 and 01 at reduced spray pressure)
Probler® P2
AA (00 and 01 at reduced spray pressure)
AA (00 and 01 at reduced spray pressure)
Electrical Requirements
120 V
100–120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
100–120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
230 V
200–230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
200–230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
Generator Size
120 V
5000 W minimum
5000 W minimum
230 V
7500 W minimum
7500 W minimum
Heater Power
120 V
3000 W during recirculation, 2000 W during pressure spray mode
3000 W during recirculation, 2000 W during pressure spray mode
230 V
4000 W during recirculation, 2760 W during pressure spray mode
4000 W during recirculation, 2760 W during pressure spray mode
Sound Pressure
In fast recirculation mode
71.3 dB(A)
71.3 dB(A)
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm)
85.6 dB(A)
85.6 dB(A)
Sound Power (Measured per ISO-9614-2)
In fast recirculation mode
79.9 dB(A)
79.9 dB(A)
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm)
93.3 dB(A)
93.3 dB(A)
Fluid Outlets
ISO Side
-5 JIC male
-5 JIC male
RES Side
-6 JIC male
-6 JIC male
Fluid Circulation Returns
ISO side
-5 JIC male
-5 JIC male
RES side
-6 JIC male
-6 JIC male
Hose Markings
ISO side
Red
Red
RES side
Blue
Blue
Wetted Parts
Wetted parts on all models
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.