Graco Inc.

XM 双组份喷涂机  双组份喷涂的划时代产品

防腐涂料高压喷涂设备

购买地点小帮手咨询信息

比例控制精准,完全可配置

固瑞克 XM 双组份喷涂机可以处理最棘手的防腐涂料,比例控制精准,可下载历史作业数据,适合多种双组份防腐涂料。

固瑞克高级计量技术是比例控制的核心。A料始终稳定输送,B料以高压力注入A料。高级传感技术允许泵补偿压力波动,保证比例精准,提高产能,减少浪费。

固瑞克 XM 适用于船舶、桥梁、铁路和风能行业,针对特殊喷涂作业也能完美配置。选择您需要的附件,就可准确配置系统。

  • 新型定量技术可确保按比例混合,提高产能,减少涂料浪费
  • 先进直观的用户控制器,实时比例显示
  • USB 端口可轻松存取、下载历史喷涂数据
  • 支持多个喷枪,生产率更高
  • 借助气动马达上的眼钩,可方便进行吊车运输
  • 可变比例系统,处理涂料比例范围从 1:1 到 10:1

手册

XM Plural-Component Sprayers
Mixed Ratio Range
1:1-10:1 (in 0.1 increments)
1:1-10:1 (in 0.1 increments)
Ratio Tolerance Range (before alarm)
+/- 5%
+/- 5%
Minimum Flow Rate
1 qt/min
0.95 l/min
Maximum Flow Rate
3 gal/min
11.4 l/min
Fluid Viscosity Range
200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding)
200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding)
Fluid Filtration
60 mesh, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included
238 micron, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included
Air Inlet
3/4 npt(f)
3/4 npt(f)
Fluid inlets without feed kits
1 1/4 npt(m)
1 1/4 npt(m)
50:1 Maximum Fluid Working Pressure of mixed material
5200 psi
35.8 MPa/358 bar
70:1 Maximum Fluid Working Pressure of mixed material
6300 psi
43.5 MPa/435 bar
Maximum Fluid Temperature
160° F
71° C
Air Supply Pressure Range
50-150 psi
0.35-1.0 MPa/3.5-10.3 bar
50:1 Maximum pump air set pressure
100 psi
0.70 MPa/7.0 bar
70:1 Maximum pump air set pressure
90 psi
0.62 MPa/6.2 bar
Maximum pump inlet fluid feed pressure
250 psi
1.7 MPa/17 bar
Maximum Air Consumption
70 scfm per gpm (at 100 psi in scfm)
1.96 cu m/min per lpm /at 0.7 MPa, 7.0 bar in cu m/min
Air Filtration
40 micron main filter, 5 micron control air filter
40 micron main filter, 5 micron control air filter
Ambient Operating Temperature Range
32 to 130° F
0 to 54° C
Ambient Storage Temperature Range
30 to160° F
-1 to 71° C
Environmental Conditions Rating
Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 130° F, Pollution Degree (11), Installation category (2)
Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 54° C, Pollution Degree (11), Installation category (2)
Sound Pressure
86 dBA at 100 psi
86 dBA at 0.7 MPa, 7 bar
Sound Power
98 dBA at 100 psi
98 dBA at 0.7 MPa, 7 bar
Weight
Base sprayer (XM1A00 and XM5A00 models) 742 lb (add component weights to base sprayer weight for your specific model weight)
Base sprayer (XM1A00 and XM5A00 models) 336.87 kg (add component weights to base sprayer weight for your specific model weight)
Wetted parts
Suction Tubes
Aluminum
Aluminum
Flush Pump
Carbide, PTFE, stainless steel, UHMWPE
Carbide, PTFE, stainless steel, UHMWPE
Hoses
Nylon
Nylon
Pumps (A and B)
Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE
Metering Valves
Carbon Steel, nickel plating, carbide, polyethylene, leather
Carbon Steel, nickel plating, carbide, polyethylene, leather
Manifold
Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE
Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE
Mixer
Stainless steel housing with acetal elements
Stainless steel housing with acetal elements