Graco Inc.

ProMix 2KE 配比系统  结构紧凑的入门级双组份配比系统

结构紧凑的入门级配比系统提供用于各类喷涂工艺的泵送和计量型号

购买地点小帮手咨询信息

ProMix 2KE 提供用于各类喷涂工艺的泵送和计量型号,令双组份涂饰简便易行。针对多色、双组分、工作场所内应用而设计。


Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops. The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts. 

19926
  • 针对多色、双组份、工作场所内应用而设计
  • 可选择基于泵送或基于计量的双组份系统
  • 将配比保持在预先定义的误差范围内,即计量类低至 ±1%,泵送类低至 ±2%。
  • 产品中不会出现不符合配比的材料,从而避免费用高昂的返工
  • 快速插装式流体阀便于维修
  • 能够编制维护提醒
ProMix 2KE Plural Component Proportioner LCD Display

LCD 显示屏

  • 使用标准电缆可安装于 10 英尺以外
  • 提供简单的操作功能: 待机、喷涂、清洗和冲洗
  • 显示配比、固化时间及材料流量
  • 计量单元可轻松换色
  • 通过材料使用屏幕跟踪成本和创建环境报告
  • 可设置以下维护提醒: 泵循环、阀循环和过滤器使用天数

手册

ProMix 2KE Meter-Based System
Maximum fluid working pressure
3000 psi
275.8 bar, 27.58 MPa
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1–30.0:1
0.1:1–30.0:1
On-ratio accuracy
up to +/- 1%, user selectable
up to +/- 1%, user selectable
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes
Fluid inlet sizes
1/4 npt(f)
1/4 npt(f)
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Approximate Weight
200 lb
91 kg
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
75–3800 cc/min
G3000HR, G250HR Meter
0.01–0.50 gpm
38–1900 cc/min
Coriolis Meter
0.005–1.00 gpm
20–3800 cc/min
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
38–1900 cc/min
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA

ProMix 2KE
Maximum fluid working pressure
See Manual 3A0868.
See Manual 3A0868.
Maximum working air pressure
100 psi
0.7 MPa, 7 bar
Air supply
75 to 100 psi
0.5 to 0.7 MPa, 5.2 to 7 bar
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1 to 30:1
0.1:1 to 30:1
Viscosity range of fluid
20 to 5000 cps
20 to 5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External power supply requirements
85 - 250 Vac, 50/60 Hz, 2 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge
85 - 250 Vac, 50/60 Hz, 2 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge
Operating temperature range
41° to 122°F
5° to 50°C
Approximate weight
300 lb
136 kg
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Fluids handled
one or two component:solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component:solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
On-ratio accuracy
1:1 to 10:1 Mixing Ratio
± 2%
± 2%
10.1:1 to 30:1 Mixing Ratio
± 5%
± 5%
Noise level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
Below 85 dBA
Below 85 dBA
Materials of construction
Wetted materials on all models
303, 304 SST; Tungsten carbide (with nickel binder);perfluoroelastomer; PTFE
303, 304 SST; Tungsten carbide (with nickel binder);perfluoroelastomer; PTFE

ProMix 2KE Pump-Based System
Maximum fluid working pressure
See the ProMix 2KE manual.
See the ProMix 2KE manual.
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1–30:1
0.1:1–30:1
On-ratio accuracy
1:1 to 10:1 Mixing Ratios: +/- 2%, 10:1 to 30:1 Mixing Ratios: +/- 5%
1:1 to 10:1 Mixing Ratios: +/- 2%, 10:1 to 30:1 Mixing Ratios: +/- 5%
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Approximate Weight
300 lb
136 kg
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA

ProMix® 2KE
Maximum fluid working pressure
See Hazardous Location Models in manual 3A0870
See Hazardous Location Models in manual 3A0870
Maximum working air pressure
100 psi
7 bar , 0.7 MPa
Air supply
75 - 100 psi
5.2 - 7 bar, 0.5 - 0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1- 30:1
0.1:1- 30:1
On-ratio accuracy
up to ±1%, user selectable
up to ±1%, user selectable
Fluids handled
one or two component:
solvent and waterborne paints
solvent and waterborne paints
polyurethanes
epoxies
acid catalyzed varnishes
moisture sensitive isocyanates
Viscosity range of fluid
20- 5000 cps
20- 5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
Fluid flow rate range
G3000, G250 Meter
0.02-1.00 gal/min
75 - 3800 cc/min.
G3000HR, G250HR Meter
0.01-0.50 gal/min
38 - 1900 cc/min.
Coriolis Meter
0.005-1.00 gal/min
20 - 3800 cc/min.
S3000 Solvent Meter (accessory)
0.01-0.50 gal/min
38 - 1900 cc/min.
Fluid inlet sizes
Flow Meter
1/4 npt(f)
1/4 npt(f)
Dose Valve/Color Valve Adapters
1/4 npt(f)
1/4 npt(f)
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External Power Supply Requirements
85 15 amp maximum circuit breaker required-
85 15 amp maximum circuit breaker required-
250 Vac, 50/60 Hz, 2 amps maximum draw
250 Vac, 50/60 Hz, 2 amps maximum draw
8 to 14 AWG power supply wire gauge
Operating temperature range
41- 122° F
5-50° C
Approximate Weight
Meter Systems
200 lb
91 kg
Pump Systems
300 lb
136 kg
Environmental Conditions Rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA
Wetted parts
303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE
303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE