Graco Inc.

适用于 NVH 泡沫的 HFR 计量系统  液压固定比例聚氨酯处理系统

适用于汽车制造业的非隔音泡沫应用

购买地点小帮手咨询信息

Graco HFR 计量系统的多功能性可确保对汽车 NVH(杂音,振动,粗糙度)应用的重定义。 采用模块化设计,与 Graco 技术以及准确分配功能相结合,为汽车制造商提供先进的、可靠且廉价的系统。

用于 NVH 泡沫的 Graco HFR 计量系统是传统 RIM 系统的一种经济实惠的替代选择。 这是一款标准配置产品,并非专用机器。 较低的初期投资使得制造商可以应用之前也许不可能的非隔音泡沫。

  • 较低的初期投资即可获得更多技术
  • 设计紧凑,可节省有价值的空间
  • 拥有成本更低 - 可在您设施处重建卧式泵
  • 先进的控制装置可监控此系统
  • 可重复分配精准的注射量

carousel_afd_nvh
  • 按比例精确分配,可减少涂料浪费,获得更好的最终效益
  • 以更低费用赢得更多技术
  • 无须担心配置问题
  • 存储 100 种注射规格与 5 组位置,每组 20 个
  • 设计紧凑,节省厂房空间
  • 控制器直观易用,从而简化培训
  • 整合的 USB 可让您将过程数据下载到优盘中以便进一步分析

手册

HFR
Honda GX 200 Engine
ANSI Power Rating @ 3600 rpm
6.5 Horsepower
4.8 kW
Maximum Working Pressure
Base Coat Pump
1000 psi
69 bar, 6.9 MPa
Top Coat Pump
3300 psi
228 bar, 22.8 MPa
Noise Level
Sound Power
105 dBa per ISO 3744
105 dBa per ISO 3744
Sound Pressure
96 dBa measured at 3.1 ft
96 dBa measured at 1 m
Maximum Delivery Rating
Base Coat Pump
3.0 gpm
11.36 liter/min
Top Coat Pump
2.20 gpm
8.33 liter/min
Maximum Tip Size
Base Coat Pump
1 applicator with .071 in. tip
1 applicator with 10 mm Nozzle
Top Coat Pump
1 gun with 0.048 in. tip, 2 gun with 0.035 in. tip, 3 gun with 0.027 in. tip, 4 gun with 0.023 in. tip
1 gun with 0.048 in. tip, 2 gun with 0.035 in. tip, 3 gun with 0.027 in. tip, 4 gun with 0.023 in. tip
Inlet Paint Strainer
Base Coat Pump
2 in. npsm, #5 mech sst
2 in. npsm, #5 mech sst
Top Coat Pump
1 in. npsm, #8 mesh sst
1 in. npsm, #8 mesh sst
Pump Inlet Size
Base Coat Pump
2 in. QD Camlock male coupler
2 in. QD Camlock male coupler
Top Coat Pump
1 in. – 11.5 npsm
1 in. – 11.5 npsm
Fluid Outlet Size
Base Coat Pump
1 in. QD Camlock male coupler
1 in. QD Camlock male coupler
Top Coat Pump
3/8 npsm
3/8 npsm
Wetted Parts
Wetted Parts
zinc-plated carbon steel, PTFE, nylon, polyurethane, UHMW, polyethylene, luoroelastomer, acetal, leather, aluminum, tungsten carbide, nickel- and zinc-plated carbon steel, stainless steel, chrome plating
zinc-plated carbon steel, PTFE, nylon, polyurethane, UHMW, polyethylene, luoroelastomer, acetal, leather, aluminum, tungsten carbide, nickel- and zinc-plated carbon steel, stainless steel, chrome plating

HFR
Maximum Fluid Working Pressure
3000 psi
207 bar, 20.7 MPa
Maximum Fluid Temperature
190°F
88°C
Fluid Inlet Feed Pressure Range
50 psi to 250 psi
3.5 bar, 0.35 MPa to 17.5 bar, 1.75 MPa
Fluid Inlets
Component A (Red)
1/2 npt(f)
1/2 npt(f)
Component B (Blue)
3/4 npt(f)
3/4 npt(f)
Fluid Outlets
Component A (Red)
#8 (1/2 in.) JIC (3/4-16 unf), with #5 (5/16 in.) JIC adapter
#8 (1/2 in.) JIC (3/4-16 unf), with #5 (5/16 in.) JIC adapter
Component B (Blue)
#10 (5/8 in.) JIC (7/8-14 unf), with #6 (3/8 in.) JIC adapter
#10 (5/8 in.) JIC (7/8-14 unf), with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
1/4 npsm(m), with plastic tubing, 250 psi maximum
1/4 npsm(m), with plastic tubing, 17.5 bar, 1.75 MPa maximum
Line Voltage Requirement
230V / 1 phase and 230V / 3 phase Models: 195-264V, 50/60 Hz400V / 3 phase: 360-440V, 50/60 Hz
230V / 1 phase and 230V / 3 phase Models: 195-264V, 50/60 Hz400V / 3 phase: 360-440V, 50/60 Hz
Amperage Requirement
See Models in instruction manual 313997
See Models in instruction manual 313997
Sound Power
93 dB
93 dB
Heater Power
A (Red) and B (Blue) heaters total, no hose, Heated HFR Models only
12kW
12kW
Hydraulic reservoir capacity
9 gal
34 liters
Recommended hydraulic fluid
Citgo A/W Hydraulic Oil, ISO Grade 46
Citgo A/W Hydraulic Oil, ISO Grade 46
Weight
Units with 12 kW Heaters
868 lb
394 kg
Units without heaters
634 lb
288 kg
Wettet Parts
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.