Graco Inc.

G3 Max  对系列渐近式和基于注入器的系统进行自动润滑

具有 DMS 选项的完整功能

购买地点小帮手咨询信息

立即使用 Graco G3,可延长机械使用寿命,减少运行费用,提高生产率\uff01

G3 设计灵活,可与基于注入器的和系列渐进式系统一起使用。 此泵性价比高,旨在服务于多个市场和工况。

有三个控制器可供选择,具有多个区域和反馈选项。 包括一个可调节泵芯 - 标准配置,还可再容纳两个泵芯。 多种容器及更多选择\uff01 最大限度的灵活性,根据您的工况高价值定制产品。

 

G3_MAX_DMS_Pump

使用 Graco 特有的数据管理系统 (DMS™),工作更快更灵活。全面了解润滑系统的运行方式及润滑情况。 用简单的 USB 闪存驱动器跟踪历史记录、提供数据保护、上传或下载数据。

G3 MAX DMS Control
  • 配有可选泵开启/泵关闭定时器的内置控制器
  • 低液位指示器发出液位低和关闭警报
  • 手动运行将启动所需润滑周期(还提供远程选项)
  • 密码保护保障安全使用 
  • 预润滑功能可在启动时开始润滑周期
  • 最多三次压力或循环开关输入,确保正确的润滑周期
  • 混合/匹配循环和压力开关,进行自定义安装和提供反馈
  • 机器计数输入 - 使用设备不一致时的理想选择
  • 外部报警器的故障指示 
  • 可选数据管理系统™(DMS)

手册

G3 Automatic Lubrication Pump
Maximum Working Pressure
Maximum Working Pressure
5100 psi
35.1 MPa/351.6 bar
Power
100–240 VAC
88 - 264 VAC, 0.8 A current, 90 VA Power, 47/63 Hz, Single phase
88 - 264 VAC, 0.8 A current, 90 VA Power, 47/63 Hz, Single phase
12 VDC
9 - 16 VDC, 5 A current, 60 W, inrush/locked rotor 12 A
9 - 16 VDC, 5 A current, 60 W, inrush/locked rotor 12 A
24 VDC
18 - 32 VDC, 2.5 A current, 60 W, inrush/locked rotor 6 A
18 - 32 VDC, 2.5 A current, 60 W, inrush/locked rotor 6 A
Outputs — Alarm Relay
Rated Load
Resistive: 0.4 A at 125 VAC, 2 A at 30 VDC, Inductive: 0.2 A at 125 VAC, 1 A at 30 VDC
Resistive: 0.4 A at 125 VAC, 2 A at 30 VDC, Inductive: 0.2 A at 125 VAC, 1 A at 30 VDC
Max Operating Voltage
Resistive: 250 VAC, 220 VAC, Inductive: 250 VAC, 220 VDC
Resistive: 250 VAC, 220 VAC, Inductive: 250 VAC, 220 VDC
Max Operating Current
Resistive: 3 A (AC), 3A (DC), Inductive: 1.5 A (AC), 1.5 A (DC)
Resistive: 3 A (AC), 3A (DC), Inductive: 1.5 A (AC), 1.5 A (DC)
Max Switching Capacity
Resistive: 50 VA, 60 W, Inductive: 25 VA, 30 W
Resistive: 50 VA, 60 W, Inductive: 25 VA, 30 W
Min Permissible Load
Resistive: 10 μA, 10m VDC, Inductive: 10 μA, 10m VDC
Resistive: 10 μA, 10m VDC, Inductive: 10 μA, 10m VDC
Outputs — Vent Valve
Required Vent Valve Type
Normally Closed
Normally Closed
Output Voltage 100/240 VAC
24 VDC
24 VDC
Output Voltage 12 VDC
Input Voltage
Input Voltage
Output Voltage 24 VDC
Input Voltage
Input Voltage
Max Operating Current
2 A
2 A
Max Operating Power
48 W
48 W
Outputs — Low Level (Dry Contact)
Contact Rating
10 Watts Maximum
10 Watts Maximum
Switch Rating
200 VDC Maximum
200 VDC Maximum
Switching Current
0.5 A Maximum
0.5 A Maximum
Carry Current
1.2 A Maximum
1.2 A Maximum
Inputs — Cycle Pressure, 1, 2, 3, Machine Count
Required Switch Type
Normally open (sink, source, or dry contact)
Normally open (sink, source, or dry contact)
Sensor Voltage 100/240 VAC
24 VDC
24 VDC
Sensor Voltage 12 VDC
Input Voltage
Input Voltage
Sensor Voltage 24 VDC
Input Voltage
Input Voltage
Load Current 100/240 VAC
22mA @ 24 VDC
22mA @ 24 VDC
Load Current 12 VDC
11mA @ 12 VDC
11mA @ 12 VDC
Load Current 24 VDC
22mA @ 24 VDC
22mA @ 24 VDC
Maximum Residual Voltage 100/240 VAC
4 V
4 V
Maximum Residual Voltage 12 VDC
2 V
2 V
Maximum Residual Voltage 24 VDC
4 V
4 V
Maximum Off Current 100/240 VAC
1.5 mA
1.5 mA
Maximum Off Current 12 VDC
1 mA
1 mA
Maximum Off Current 24 VDC
1.5 mA
1.5 mA
Input Impedance
1.1
1.1
Response Time
60 ms
60 ms
Cycle Rate
8.0 Hz (50% duty cycle)
8.0 Hz (50% duty cycle)
Fluid Grease Models
Grease NLGI 000 — #2
Grease NLGI 000 — #2
Fluid Oil Models
At least 40 cSt oil. Oil units with low level must have at least 80 cSt.
At least 40 cSt oil. Oil units with low level must have at least 80 cSt.
Pumps
Up to 3
Up to 3
Pump Output – 2 spacers
0.12 sq in (2 sq cm) / min per outlet - 2 spacer
0.12 sq in (2 sq cm) / min per outlet - 2 spacer
Pump Output – 1 spacer
0.18 in 3 (3 cm3) / min per outlet - 1 spacer
0.18 in 3 (3 cm3) / min per outlet - 1 spacer
Pump Output – 0 spacers
0.25 in 3 (4 cm3) / min per outlet - 0 spacers
0.25 in 3 (4 cm3) / min per outlet - 0 spacers
Pump Outlet
1/4-18 NPSF. Mates with 1/4-18 NPT male fittings
1/4-18 NPSF. Mates with 1/4-18 NPT male fittings
Reservoir Size
2 l
2 l
IP Rating
IP69K
IP69K
Sensor Inputs
3 (any of pressure or cycle)
3 (any of pressure or cycle)
Sensor Inputs
1 (machine count)
1 (machine count)
Ambient Temps
-13°F to 158°F
-25°C to 70°C
Weight (Dry - includes power cord and plug) Without follower plate
13.3 lb
6.03 kg
Weight (Dry - includes power cord and plug) With Follower plate
14.2 lb
6.44 kg
Wetted Parts
nylon 6/6 (PA), trogamid T5004-060, zinc plated steel, carbon steel, alloy steel, stainless steel, nitrile rubber(buna-N), bronze, nickel plated alnico, chemically lubricated acetal, aluminum, PTFE, Grillamid
nylon 6/6 (PA), trogamid T5004-060, zinc plated steel, carbon steel, alloy steel, stainless steel, nitrile rubber(buna-N), bronze, nickel plated alnico, chemically lubricated acetal, aluminum, PTFE, Grillamid
Sound Data
<60 dB
<60 dB