Graco Inc.

GL-1 润滑脂注入器  单线平行系统

高压时的高排量输出,用于要求最严格的工况

购买地点小帮手咨询信息

使用 Graco 可调 GL-1 润滑脂注入器系统定制与您的系统匹配的装置。 旨在满足每个润滑点的需求,这些精确设定的系统可确保在最恶劣的操作环境下长期可靠运转。

GL1 Injector Specs
  • GL-1 注入器为歧管系统提供独立式和替换式注入器,可轻松进行定制满足各种工况
  • 便于观察的顶置循环钻孔指示器,有助于快速确认注入器是否正常运转
  • GL-1 注入器调整范围为 0.008 立方英寸至 0.08 立方英寸(0.13 至 1.31 立方厘米)
  • 工作压力范围为 1000 至 3500 磅/平方英寸(69 至 241 巴),可提供最佳性能,润滑脂等级最高为 NLGI #2

GL-1 Injectors
Maximum operating pressure
3500 psi
241 bar24 MPa
Suggested operating pressure
2500 psi
172 bar 17 MPa
Reset pressure
600 psi
41 bar 4.1 MPa
Output volume per cycle
adjustable: 0.008 to 0.08 in³
adjustable: 0.008 to 0.08 in³
Wetted parts
carbon steel, stainless steel, copper, fluoroelastomer
carbon steel, stainless steel, copper, fluoroelastomer
Recommended fluids
N.L.G.I. #2 grease down to 32°F
N.L.G.I. #2 grease down to 0°C

GL-1 HCP (High Corrosion Protection) Injectors
Maximum operating pressure
3500 psi
24.1 MPa, 241 bar
Suggested operating pressure
2500 psi
17.2 MPa, 172 bar
Reset pressure
600 psi
4.1 MPa, 41 bar
Output volume per cycle
adjustable: 0.008 to 0.08 cubic inches
adjustable: 0.008 to 0.08 cubic inches
Wetted parts
carbon steel, stainless steel, fluoroelastomer
carbon steel, stainless steel, fluoroelastomer
Recommended fluids
N.L.G.I. #2 grease down to 32°F
N.L.G.I. #2 grease down to 0°C