Graco Inc.

GL-11 润滑脂注入器  单线平行系统

高压时的高排量输出,用于要求最严格的工况

购买地点小帮手咨询信息

使用 Graco 可调 GL-11 润滑脂注入器系统定制与您的系统匹配的装置。 旨在满足每个润滑点的需求,这些精确设定的系统可确保在最恶劣的操作环境下长期可靠运转。

  • 便于观察的顶置循环钻孔指示器,有助于快速确认注入器是否正常运转
  • GL-11 注入器调整范围为 0.05 立方英寸至 0.5 立方英寸(0.8 至 8.2 立方厘米)
  • 工作压力范围为 1000 至 3500 磅/平方英寸(69 至 241 巴),可提供最佳性能,润滑脂等级最高为 NLGI #2

GL-11 Injector
Maximum Working Pressure
3500 psi
241 bar, 24 MPa
Minimum Operating Pressure
1000 psi
69 bar, 6.9 MPa
Suggested Operating Pressure
2500 psi
172 bar, 17 MPa
Reset Pressure
600 psi
41 bar, 4.1 MPa
Output Volume Per Cycle
Adjustable: 0.050 to 0.500 in³ (Maximum adjustment setting is when adjusting screw (3) is just making contact with indicator pin (8) with no inlet pressure. Turn adjusting screw clockwise (in), to reduce output. To adjust, loosen lock nut (4) and turn adjusting screw (3) the number of turns indicated on the GL-11 Volume Adjustment Table to obtain the desired volume. Tighten lock nut (4) when desired volume setting is reached)
Adjustable: 0.050 to 0.500 in³ (Maximum adjustment setting is when adjusting screw (3) is just making contact with indicator pin (8) with no inlet pressure. Turn adjusting screw clockwise (in), to reduce output. To adjust, loosen lock nut (4) and turn adjusting screw (3) the number of turns indicated on the GL-11 Volume Adjustment Table to obtain the desired volume. Tighten lock nut (4) when desired volume setting is reached)
Wetted Parts
Carbon steel, Stainless steel, Copper, Fluoroelastomer
Carbon steel, Stainless steel, Copper, Fluoroelastomer
Recommended fluids
Lubricant: NLGI 000 - NLGI
Lubricant: NLGI 000 - NLGI
Inlet
1/2 in - 14 npt
1/2 in - 14 npt
Outlet
1/4 in - 18 npsf
1/4 in - 18 npsf
Outlet
1/8 in - 27 npsf
1/8 in - 27 npsf