Graco Inc.

SaniForce 1040 气动双隔膜泵  1 英寸卫生级气动双隔膜泵

流量最高达 40 加仑/分钟(151 升/分钟),适合于食品行业应用。


固瑞克SaniForce 1040 卫生级气动双隔膜泵配有业内性能卓越、经久耐用的免润滑空气阀。作为大流量输送和多工作点应用的理想之选,固瑞克气动双隔膜泵值得信赖,可配置包括 Santoprene、PTFE 和 EPEM/PTEE 一体式膜片在内的各款食品级膜片。

Available in CE1935/2004 - check manual for configuration

SaniForce 1040 FDA
  • 1.5 英寸(38 毫米)卡箍连接
  • 流体接触区域均符合 FDA 标准和美国联邦法规 (CFR) 第 21 章规定
  • 流体压力可达 120 磅/平方英寸(8.4 巴,0.84 兆帕)
  • 流量为可达40 加仑/分钟(151 升/分钟)
  • 应用于大流量场合的浓缩液卸料或者从原有容器中输送流体到分装线,物料粘度最高可达10000厘泊
  • 适用的物料包括浓缩果汁、沙司、果酱、淀粉、酒、食用油、果冻
Husky AODD top view


  • 三向导向阀保证运行无死点
  • 移动部件少,提高耐用性并减少维修时间
  • 1040、1590 和 2150 SaniForce 泵配有相同的中心体
  • 空气阀 100%外部可直接维修
Overmolded PTFE Diaphragm


  • 固瑞克 PTFE/EPDM 一体式膜片对 PTFE 流体端和 EPDM 空气端采用一次性整体铸膜,不留任何让细菌滋生的空隙。
  • 流体端隔膜板不会暴露在外,从而减少膜片磨损,延长膜片寿命
  • 在磨损性应用中膜片的使用寿命更长
  • SaniForce 515、1040、1590、2150 和 SaniForce 1590 HS、3150 HS 可选配


SaniForce 1040 Diaphragm Pumps
Maximum fluid working pressure
120 psi
8 bar, 0.8 MPa
Air pressure operating range
20–120 psi
1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption
50 scfm
1.4 m³/minute
Air consumption at 70 psi, 20 gpm
41 scfm
1.2 m³/minute
Maximum free-flow delivery
41 gpm
159 lpm
Maximum pump speed
256 cpm
256 cpm
Gallons/liters per cycle*
0.16 g
0.57 l
Maximum suction lift
29 ft wet, 16 ft dry
8.8 m wet, 4.9 m dry
Maximum size pumpable solids
1/8 in
3.2 mm
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
92 dB(A)
92 dB(A)
Sound power level
100 dB(A)
100 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
73 dB(A)
73 dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings
Stainless Steel
Inlet/Outlet Sizes
Air inlet size
0.5 in npt(f)
0.5 in npt(f)
Fluid inlet size
1.5 in sanitary flange
1.5 in sanitary flange
Fluid outlet size
1.5 in sanitary flange
1.5 in sanitary flange
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
stainless steel
stainless steel
Wetted materials depending on model
EPDM, Polychloroprene, PTFE, Santoprene
EPDM, Polychloroprene, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
FD1 Models
55 lb
24.9 kg
FA1 Models
49 lb
22.2 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. *** The pump user must verify that the construction materials meet their specific application requirements.