Graco Inc.

SaniForce 1590 气动双隔膜泵  1.5 英寸气动双隔膜泵

最大流量达 90 加仑/分钟(341 升/分钟)

购买地点小帮手咨询信息

固瑞克SaniForce 1590卫生级气动双隔膜泵配有业内性能卓越、经久耐用的免润滑空气阀。作为大流量输送和多工作点应用的理想之选,固瑞克气动双隔膜泵值得信赖,可配置包括 Santoprene、PTFE 和 EPEM/PTEE 一体式膜片在内的各款食品级膜片。

Available in CE1935/2004 - check manual for configuration

SaniForce 1590
  • 2 英寸(51 毫米)卡箍连接
  • 最大流量90 加仑/分钟(341 升/分钟),紧凑便携型设计
  • 流体压力最高为 120 磅/平方英寸(8.4 巴,0.84 兆帕)
  • 流体接触区域均符合 FDA 标准和美国联邦法规 (CFR) 第 21 章规定
  • 应用于大流量场合的浓缩液卸料或者从原有容器中输送流体到分装线,物料粘度最高可达15000厘泊
  • 适用的物料包括浓缩果汁、沙司、果酱、淀粉、酒、食用油、果冻
Husky AODD top view

获得专利的免润滑空气阀

  • 三向导向阀保证运行无死点
  • 316 不锈钢连杆设计,使得设备使用寿命长并有良好的耐腐蚀性
  • 1040、1590 和 2150 SaniForce 泵配有相同的中心体
  • 空气阀 100%外部可直接维修
Overmolded PTFE Diaphragm

PTFE/EPDM 一体式膜片

  • SaniForce 515、1040、1590、2150 和 SaniForce 1590 HS、3150 HS 可选配
  • 流体端隔膜板不会暴露在外,从而减少膜片磨损,延长膜片寿命
  • 在磨损性应用中膜片的使用寿命更长

资料

SaniForce 1590 Diaphragm Pumps
Maximum fluid working pressure
120 psi
8 bar, 0.8 MPa
Air pressure operating range
20–120 psi
1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption
130 scfm
3.7 m³/minute
Air consumption at 70 psi, 50 gpm
42 scfm
1.2 m³/minute
Maximum free-flow delivery
100 gpm
379 lpm
Maximum pump speed
200 cpm
200 cpm
Gallons/liters per cycle*
0.5 g
1.9 l
Maximum suction lift
29 ft wet, 16 ft dry
8.8 m wet, 4.9 m dry
Maximum size pumpable solids
3/16 in
4.8 mm
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
88 dB(A)
88 dB(A)
Sound power level
95 dB(A)
95 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
79 dB(A)
79 dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings
PTFE
220°F
104°C
Santoprene®
180°F
82°C
EPDM
275°F
135°C
Polychloroprene
200°F
93°C
Stainless Steel
250°F
121°C
Inlet/Outlet Sizes
Air inlet size
0.5 in npt(f)
0.5 in npt(f)
Fluid inlet size
2.0 in sanitary flange
2.0 in sanitary flange
Fluid outlet size
2.0 in sanitary flange
2.0 in sanitary flange
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
316 stainless steel
316 stainless steel
Wetted materials depending on model
EPDM, Polychloroprene, PTFE, Santoprene
EPDM, Polychloroprene, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
Weight
FD2 Models
89 lb
40.3 kg
FA1 Models
83 lb
37.6 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. *** The pump user must verify that the construction materials meet their specific application requirements.