Graco Inc.

SaniForce 3150 3A 高级卫生泵  优质的卫生设备双隔膜泵

配备 4 英寸卡箍连接,便于快速拆卸和清洗,最大流量达 150 加仑/分钟(568 升/分钟),通过 3A 认证。

购买地点小帮手咨询信息

SaniFroce 3150 3A 气动双隔膜泵专用于卫生要求严格的乳品加工业。

3150 3A 卫生泵安装在落地支架上并配有检漏仪,可通过360度旋转彻底排出残留的设备清洗剂。

Available in CE1935/2004 - check manual for configuration

3150 3A Diaphragm Pump
  • 最大流量为 150 加仑/分钟(568 升/分钟)
  • 泵体可360度旋转便于排出残留物料
  • 唯一经过 3A 认证的 3 英寸泵,适用于乳品加工业
  • 配备固瑞克免润滑、无死点运行的空气阀
  • 应用于从各种容器中输送流体至分装线,物料粘度最高可达20000厘
  • 适用的物料包括可流动的酸奶油、酸奶及可流动的干奶酪
SaniForce HS 3A Leak Detector

泄漏检测设计

  • 3150 3A泵上标配有电子检漏仪
  • 可及时检测出因膜片破裂导致的物料泄漏
  • 内置的警报器会发声,并发出外部指令停止泵的运行
  • 同时使用光学和导电传感器以确保监测的可靠性
  • 使用 24 伏或 110/220 伏电源

3150 3A Diaphragm

EPDM 一体式膜片

  • 获得3A认证
  • 光滑平坦的膜片表面已于清洁,无凹陷区域
  • 没有暴露的膜片压板可避免污染物聚集

SaniForce 3150 HS and 3150 3A Diaphragm Pumps
Maximum fluid working pressure
120 psi
8 bar, 0.8 MPa
Air pressure operating range
20–120 psi
1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption
175 scfm
5.0 m³/minute
Air consumption at 70 psi, 60 gpm
50 scfm
1.4 m³/minute
Maximum free-flow delivery
150 gpm
570 lpm
Maximum pump speed
145 cpm
145 cpm
Gallons/liters per cycle*
1.0 g
3.9 l
Air inlet size
0.5 in npt(f)
0.5 in npt(f)
Maximum suction lift
Flapper
10 ft wet, 5 ft dry
3.5 m wet, 1.7 m dry
Ball
18 ft wet, 9 ft dry
5.5 m wet, 2.7 m dry
Maximum size pumpable solids
Flapper
2.5 in
63.5 mm
Ball
1.0 in
25.4 mm
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
90 dB(A)
90 dB(A)
Sound power level
103 dB(A)
103 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
85 dB(A)
85 dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings
PTFE
220°F
104°C
Santoprene®
180°F
82°C
Buna-N
180°F
82°C
Fluoroelastomer
250°F
121°C
3A Approved EPDM
275°F
135°C
Fluid inlet size
2.0 in sanitary flange
2.0 in sanitary flange
Fluid outlet size
2.0 in sanitary flange
2.0 in sanitary flange
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
316 stainless steel, 3A Approved EPDM
316 stainless steel, 3A Approved EPDM
Wetted materials depending on model
Buna–N (Nitrile), Fluoroelastomer, 316 stainless steel, 3A Approved EPDM, PTFE, Santoprene
Buna–N (Nitrile), Fluoroelastomer, 316 stainless steel, 3A Approved EPDM, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
300 series stainless steel, polyester (labels), LDPE foam (gasket)
300 series stainless steel, polyester (labels), LDPE foam (gasket)
Weight
All Models
145 lb
66 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. *** The pump user must verify that the construction materials meet their specific application requirements.