Graco Inc.

SaniForce 3150 吨箱卸料系统 (BES)  卫生级吨箱卸料系统

固瑞克 3150 BES 系统配备台泵,流量达 到300加仑/分钟(1135 升/分钟),可输送粘度高达 100,000 厘泊 的物料。

购买地点小帮手咨询信息

SaniForce 3150 吨箱卸料系统 (BES) 可直接从 300 加仑(1135.6 升)的袋装容器中高效卸料,无需稀释。该系统标配充气式膨胀密封圈,可快速替换空容器。气动控制用于不需要计量或批量控制的应用场合,而电动控制则可用于需要这些功能的场合。

  • 配备两台泵,最大流量可达300 加仑/分钟(1135升/分钟)
  • 最大流体压力为 120  psi(8.4 bar,0.84 MPa)
  • 无需增压泵
  • 多数物料的卸料时间在五分钟之内
  • 选配气动或电子控制装置
  • 直接从300加仑(1135升)的容器中排出高达100,000厘泊的高粘度物料,无需稀释
  • 适合泵送的物料包括番茄酱、花生酱、糖衣、霜状白糖、果酱和果冻、牙膏和药膏

SaniForce BES 300

可膨胀压力密封:

  • 充气式刮片膨胀形成严实的密封,防止污染物进入容器
  • 使用膨胀刮片密封可提高效率及更快替换空容器
  • 采用独有的浮动压盘,省去在压盘下精确放置料桶的麻烦

SaniForce Bin Evacuation Systems, BES3xx and BES4xx
Maximum Working Fluid Pressure
120 psi
8.4 bar, 0.84 MPa
Compressed air requirement
80–120 psi
5.5–8.4 bar, 0.55–0.84 MPa
Fluid displacement (each pump)
1.03 gal/cycle
3.9 l/cycle
Flow rate @ 60 cpm
120 gpm
454 lpm
Pressure ratio
1:1
1:1
Air consumption (each pump)
0.8 scfm per gpm @ 70 psi
0.006 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pump outlet
3 in tri-clamp
3 in tri-clamp
Sound data
See your pump manual.
See your pump manual.
Wetted parts
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Pneumatic Control Panel
Maximum input air pressure
120 psi
8.4 bar, 0.84 MPa
Maximum up/down ram pressure
75 psi
5.2 bar, 0.5 MPa
Air inlet — air controls
3/4 in npt(f)
3/4 in npt(f)
Air inlet — pump
1/2 in npt(f)
1/2 in npt(f)
Electronic Control Panel
Maximum input air pressure
120 psi
8.4 bar, 0.84 MPa
Maximum up/down ram pressure
100 psi
7 bar, 0.7 MPa
External power supply
110 VA, 60 Hz, 15 amp maximum circuit breaker required
110 VA, 60 Hz, 15 amp maximum circuit breaker required
SaniForce Bin Evacuation Systems, BESAxx, BESBxx, BESExx, and BESFxx
Compressed air requirement
80–100 psi
5.5–7 bar, 0.55–0.7 MPa
Pump outlet
2 in tri-clamp
2 in tri-clamp
Sound data
See your pump manual.
See your pump manual.
Wetted parts
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Maximum Working Fluid Pressure
BESAxx and BESBxx
410 psi
28.3 bar, 2.8 MPa
BESExx and BESFxx
1450 psi
100.4 bar, 10.1 MPa
Fluid displacement (each pump)
BESAxx and BESBxx
0.23 gal/cycle
0.87 l/cycle
BESExx and BESFxx
0.14 gal/cycle
0.53 l/cycle
Flow rate @ 60 cpm
BESAxx
27.6 gpm
104.5 lpm
BESBxx
54 gpm
204.4 lpm
BESExx
17 gpm
64.3 lpm
BESFxx
34 gpm
128.7 lpm
Pressure ratio
BESAxx and BESBxx
4.3:1
4.3:1
BESExx and BESFxx
10:1
10:1
Air consumption (each pump)
BESAxx and BESBxx
1.8 scfm per gpm @ 70 psi
0.14 m³/minute per lpm @ 4.8 bar, 0.48 MPa
BESExx and BESFxx
3.5 scfm per gpm @ 70 psi
0.026 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pneumatic Control Panel
Maximum input air pressure
100 psi
7 bar, 0.7 MPa
Maximum up/down ram pressure
75 psi
5.2 bar, 0.5 MPa
Air inlet — air controls
3/4 in npt(f)
3/4 in npt(f)
Air inlet — pump
1 in npt(f)
1 in npt(f)
Electronic Control Panel
Maximum input air pressure
100 psi
7 bar, 0.7 MPa
Maximum up/down ram pressure
100 psi
7 bar, 0.7 MPa
External power supply
110 VA, 60 Hz, 15 amp maximum circuit breaker required
110 VA, 60 Hz, 15 amp maximum circuit breaker required