Graco Inc.

SaniForce 3150 压盘泵  HS 高级卫生膈膜式压盘泵

采用 4 英寸(10 厘米)卡箍接口,最大流量可达 100 加仑/分钟(379 升/分钟)并且具备 32 Ra 卫生级表面处理效果

购买地点小帮手咨询信息

SaniForce 3150 HS 卫生级压盘泵标配充气式膨胀压力密封,方便快速更换空容器并且排料率达99%,无需对物料进行稀释。

Available in CE1935/2004 - check manual for configuration

19336_horizontal
  • 不锈钢下缸体符合 32 Ra 表面处理效果,可在五分钟内完成拆卸
  • 流量高达 100 加仑/分钟(378 升/分钟)
  • 流体接触区域均符合 FDA 标准且遵照美国联邦法典第 21 章
  • 同一规格的压盘和密封圈适用于直桶和锥形桶两种类型
  • 可直接从55加仑料桶排出凝滞不能流动的物料
  • 适合泵送的物料包括水果填心料、番茄酱、花生酱、糖衣、药膏和沐浴露
SaniForce Drum Unloader Inflated Seal

充气式膨胀压力密封:

  • 符合FDA 标准的充气式膨胀压力密封
  • 可快速替换空容器
  • 底部内衬可防止包装袋吸入泵内
  • 排料率达 99%

Sanitary Drum Unloaders
Maximum Working Fluid Pressure
5:1 Ratio Piston Pumps
410 psi
28.3 bar, 2.8 MPa
6:1 Ratio Piston Pumps
650 psi
44.8 bar, 4.5 MPa
12:1 Ratio Piston Pumps
1450 psi
100.0 bar, 10 MPa
Diaphragm Pumps
120 psi
8.2 bar, 0.8 MPa
Maximum Air Inlet Pressures
Piston Pump Ram Packages
100 psi
6.9 bar, 0.7 MPa
Diaphragm Pump Ram Packages
120 psi
8.0 bar, 0.8 MPa
Ram
100 psi
6.9 bar, 0.7 MPa
6:1 and 12:1 Ratio Piston Pumps
100 psi
6.9 bar, 0.7 MPa
5:1 Ratio Piston Pumps
80 psi
5.5 bar, 0.6 MPa
Diaphragm Pumps
120 psi
8 bar, 0.8 MPa
Air Inlet Size
Enclosed Controls
1/2 npt(f)
1/2 npt(f)
Exposed Controls
3/4 npt(f)
3/4 npt(f)
Maximum Ram Package Operating Temperature
5:1 Ratio Piston Pump Ram Packages
140°F
60°C
All Other Ram Packages
150°F
66°C
Maximum/Minimum Drum Sizes
Maximum Drum ID
24 in
61 cm
Minimum Drum ID — straight sided
19.4 in
49 cm
Minimum Drum ID — tapered`
19.0 in
48 cm
Maximum Drum Height
40.75 in
104 cm
Wetted Parts
Inflatable Seal
Neoprene
Neoprene
Ram (plate, fittings, gaskets)
300–Series stainless steel, Buna-N, and polypropylene
300–Series stainless steel, Buna-N, and polypropylene
5:1 Ratio Piston Pumps (see pump manual)
Stainless steel, Buna-N, FKM, PTFE and UHMWPE. Priming piston pumps also have polychloroprene and nylon. Model 24F197 also has silicone.
Stainless steel, Buna-N, FKM, PTFE and UHMWPE. Priming piston pumps also have polychloroprene and nylon. Model 24F197 also has silicone.
6:1 Ratio Piston Pumps (see pump manual)
Stainless steel, buna-N, polychloroprene, nitrile, nylon, and UHMWPE. Certain models have PTFE packings.
Stainless steel, buna-N, polychloroprene, nitrile, nylon, and UHMWPE. Certain models have PTFE packings.
12:1 Ratio Piston Pumps (see pump manual)
Stainless steel, acetal, nitrile, PTFE, UHMWPE
Stainless steel, acetal, nitrile, PTFE, UHMWPE
Diaphragm Pumps (see pump manual)
316 stainless steel, Santoprene, Buna-N, fluoroelastomer, EPDM, weighted CR, weighted polychloroprene, and PTFE
316 stainless steel, Santoprene, Buna-N, fluoroelastomer, EPDM, weighted CR, weighted polychloroprene, and PTFE
Noise Data
All Models
See your pump manual.
See your pump manual.