Graco Inc.

SaniForce 吨箱卸料系统 (BES)  吨箱卸料系统

从 300 加仑(1135 升)袋装容器中高效卸料 - 无需动手舀取或倾倒料箱。

购买地点小帮手咨询信息

在您的工厂中使用 SaniForce 吨箱卸料系统 (BES) 直接从 300 加仑(1135.6 升)袋装容器中高效卸料,无需手动舀取或倾倒料箱,从而节省时间和资金。

彻底的箱式卸料可节省水蒸汽成本,提供更好的流程控制,无需使用成本高昂的增压泵。

19227
  • 最大流量达 100 加仑/分钟(400 升/分钟)
  • 最大流体压力为 1200 psi(83 bar,8.3 MPa)
  • 无需增压泵
  • 多数物料的卸料时间在五分钟之内
  • 采用气动或电子控制装置
  • 直接从300加仑(1135升)的容器排出高达1,000,000厘泊的高粘度物料,无需稀释
  • 适合泵送的物料包括花生酱、焦糖、花生酱、玉米浆、糖衣、霜状白糖、果酱和果冻、牙膏和化妆品
SaniForce BES 300

充气式膨胀压力密封:

  • 充气式膨胀刮片形成严实的密封,防止污染物进入容器
  • 使用膨胀刮片密封可加快替换空容器 的速度
  • 采用独有的浮动压盘,省去在压盘下精确放置料桶的麻烦

SaniForce Bin Evacuation Systems, BES3xx and BES4xx
Maximum Working Fluid Pressure
120 psi
8.4 bar, 0.84 MPa
Compressed air requirement
80–120 psi
5.5–8.4 bar, 0.55–0.84 MPa
Fluid displacement (each pump)
1.03 gal/cycle
3.9 l/cycle
Flow rate @ 60 cpm
120 gpm
454 lpm
Pressure ratio
1:1
1:1
Air consumption (each pump)
0.8 scfm per gpm @ 70 psi
0.006 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pump outlet
3 in tri-clamp
3 in tri-clamp
Sound data
See your pump manual.
See your pump manual.
Wetted parts
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Pneumatic Control Panel
Maximum input air pressure
120 psi
8.4 bar, 0.84 MPa
Maximum up/down ram pressure
75 psi
5.2 bar, 0.5 MPa
Air inlet — air controls
3/4 in npt(f)
3/4 in npt(f)
Air inlet — pump
1/2 in npt(f)
1/2 in npt(f)
Electronic Control Panel
Maximum input air pressure
120 psi
8.4 bar, 0.84 MPa
Maximum up/down ram pressure
100 psi
7 bar, 0.7 MPa
External power supply
110 VA, 60 Hz, 15 amp maximum circuit breaker required
110 VA, 60 Hz, 15 amp maximum circuit breaker required
SaniForce Bin Evacuation Systems, BESAxx, BESBxx, BESExx, and BESFxx
Compressed air requirement
80–100 psi
5.5–7 bar, 0.55–0.7 MPa
Pump outlet
2 in tri-clamp
2 in tri-clamp
Sound data
See your pump manual.
See your pump manual.
Wetted parts
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Maximum Working Fluid Pressure
BESAxx and BESBxx
410 psi
28.3 bar, 2.8 MPa
BESExx and BESFxx
1450 psi
100.4 bar, 10.1 MPa
Fluid displacement (each pump)
BESAxx and BESBxx
0.23 gal/cycle
0.87 l/cycle
BESExx and BESFxx
0.14 gal/cycle
0.53 l/cycle
Flow rate @ 60 cpm
BESAxx
27.6 gpm
104.5 lpm
BESBxx
54 gpm
204.4 lpm
BESExx
17 gpm
64.3 lpm
BESFxx
34 gpm
128.7 lpm
Pressure ratio
BESAxx and BESBxx
4.3:1
4.3:1
BESExx and BESFxx
10:1
10:1
Air consumption (each pump)
BESAxx and BESBxx
1.8 scfm per gpm @ 70 psi
0.14 m³/minute per lpm @ 4.8 bar, 0.48 MPa
BESExx and BESFxx
3.5 scfm per gpm @ 70 psi
0.026 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pneumatic Control Panel
Maximum input air pressure
100 psi
7 bar, 0.7 MPa
Maximum up/down ram pressure
75 psi
5.2 bar, 0.5 MPa
Air inlet — air controls
3/4 in npt(f)
3/4 in npt(f)
Air inlet — pump
1 in npt(f)
1 in npt(f)
Electronic Control Panel
Maximum input air pressure
100 psi
7 bar, 0.7 MPa
Maximum up/down ram pressure
100 psi
7 bar, 0.7 MPa
External power supply
110 VA, 60 Hz, 15 amp maximum circuit breaker required
110 VA, 60 Hz, 15 amp maximum circuit breaker required