Graco Inc.

增压模件 

用于给大流量供料系统加压,性能稳定

购买地点小帮手咨询信息

汽车喷漆车间需要更高的流体压力,增压模件是理想选择。

  • 给大供料系统的流体加压,性能稳定
  • 可设定压力或流量输出
  • 多一个泵作为后备,或同时供应两条生产线

Premier and King Booster Packages
56:1 Ratio King Pump
Ratio
56:1
56:1
Maximum fluid working pressure
5600 psi)
38.5 MPa, 385 bar
Maximum air input pressure
100 psi
0.7 MPa, 7 bar
Pump cycles per 3.8 liters (1 gal.)
18
18
Fluid flow at 60 cycles/min
3.4 gpm
12.9 liters/min
Air motor piston effective area
78.5 in.²
506 cm²
Stroke length
4.75 in.
120 mm
Displacement pump effective area
1.40 in²
9 cm²
Maximum pump operating temperature
180°F
82°C
Air inlet size
3/4 npsm(f)
3/4 npsm(f)
Fluid inlet size
2 in. npt(f)
2 in. npt(f)
Fluid outlet size
1 in. npt(f)
1 in. npt(f)
Weight
approx. 130 lb
approx. 59 kg
Wetted parts
316, 440, and 17–4 PH Grades of Stainless Steel; Tungsten Carbide; PTFE; Glass-Filled PTFE
316, 440, and 17–4 PH Grades of Stainless Steel; Tungsten Carbide; PTFE; Glass-Filled PTFE
45:1 Ratio Premier Pump
Ratio
45:1
45:1
Maximum fluid working pressure
4500 psi
31 MPa, 310 bar
Maximum air input pressure
100 psi
0.7 MPa, 7 bar
Pump cycles per 3.8 liters (1 gal.)
8.7
8.7
Fluid flow at 60 cycles/min
6.9 gpm
26.1 liters/min
Air motor piston effective area
124 in.²
800 cm²
Stroke length
4.75 in.
120 mm
Displacement pump effective area
2.79s in²
18 cm²
Maximum pump operating temperature
150°F
65.5°C
Air inlet size
3/4 npsm(f)
3/4 npsm(f)
Fluid inlet size
2 in. npt(f)
2 in. npt(f)
Fluid outlet size
1–1/2 in. npt(m)
1–1/2 in. npt(m)
Weight
approx. 240 lb
approx. 109 kg
Wetted parts
Carbon Steel; Chrome, Zinc, and Nickel Plating; 304, 440, and 17–4PH Grades of Stainless Steel; Tungsten Carbide; Ductile Iron; PTFE; Acetal; Leather
Carbon Steel; Chrome, Zinc, and Nickel Plating; 304, 440, and 17–4PH Grades of Stainless Steel; Tungsten Carbide; Ductile Iron; PTFE; Acetal; Leather