Graco Inc.

高温流体调节器 

为 Therm-O-Flow 系统提供精确分配

购买地点小帮手咨询信息

维持流体压力,获得一致的密封胶和高粘性涂料液珠控制

  • 提供一致的液珠宽度,不受泵交叉影响
  • 精确的输出,卓越的涂料输送速度
  • 双元件加热器支持温度控制 - 不会出现涂料炭化或堵管
  • 适用于热熔胶、非水基并受温度限制的密封胶和粘合剂
  • 从 200 至 3000 磅/平方英寸的精度压力控制

Heatd Fluid Regulator
Maximum Fluid Working Pressure
3000 psi
21 MPa, 210 bar
Regulated Fluid Pressure Range
200-3000 psi
1.4-21 MPa, 14-210 bar
Maximum Flow Rate
1.2 gpm with 7000 centipoise fluid at 350°F
4.56 liter/min with 7000 centipoise fluid at 176°C
Maximum Fluid Temperature
400°F
204°C
Voltage
230/240 Vac
230/240 Vac
Wattage
220 W
220 W
Maximum Current
1 A
1 A
Resistance temperature detector (platinum RTD; 0.00385 ohm/ohm/°C)
108.2 ohms @ 70°F
108.2 ohms @ 70°F
Heater resistance
Individually: 524 ohms, + 53/- 26 ohms. Wired in parallel: 262 ohms, + 26/- 13 ohms
Individually: 524 ohms, + 53/- 26 ohms. Wired in parallel: 262 ohms, + 26/- 13 ohms
Fluid Inlet
3/8 npt(f)
3/8 npt(f)
Fluid Outlet
3/8 npt(f)
3/8 npt(f)
Optional Fluid Outlet
1/4 npt(f)
1/4 npt(f)
Weigh
6.5 lb
2.9 kg
Wetted Parts
Tungsten Carbide, Copper, Cadmium and Zinc-Plated Steel, PTFE, Chrome-Plated Stainless Steel
Tungsten Carbide, Copper, Cadmium and Zinc-Plated Steel, PTFE, Chrome-Plated Stainless Steel