Graco Inc.

WB3000  Air-Assist Waterborne Isolation System

The simple and reliable way to isolate waterborne coatings

Kust ostaTeabepäring
Jagamine |

Graco's WB3000 is the dependable way to isolate waterborne coatings when spraying with electrostatic equipment. Ideal for spray booth systems.

  • Ideal for high pressure waterborne material spraying with the Pro Xp60 AA WB gun for a superior finish quality and operator comfort
  • Merkur ES 30:1 pump is one of the most efficient sprayers designed to use less material and reduce air usage and pulsation
  • Standard voltage display allows for easy monitoring of voltage for overall performance
  • Simple 5 gallon (19 l) pail design is easy to color change and flush the system
  • Electrostatic gun Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
  • Portable cabinet increases mobility for a wide variety of applications
Kuva väärtused meetermõõdustikus.. Kuva väärtused inglise mõõdustikus..

WB3000 Isolation System and Pro Xp 60 AA WB Gun
Maximum Working Fluid Pressure
3000 psi
21 MPa, 210 bar
Maximum Working Air Pressure
100 psi
0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet
45 psi
0.32 MPa, 3.2 bar
Maximum Fluid Operating Temperature
120°F
48°C
Short Circuit Current Output
125 microamperes
125 microamperes
Voltage Output Energy
0.35 J with fluid hose 24M508 installed. H60T18: 60 kV. H60M18: 30–60 kV
0.35 J with fluid hose 24M508 installed. H60T18: 60 kV. H60M18: 30–60 kV
Sound Power (measured per ISO Standard 9216)
at 40 psi: 90.4 dB(A), at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A), at 0.7 MPa, 7.0 bar: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 87.0 dB(A), at 100 psi: 99.0 dB(A)
at 0.28 MPa, 2.8 bar: 87.0 dB(A), at 0.7 MPa, 7.0 bar: 99.0 dB(A)
Air Inlet Fitting
1/4 npsm(m) left-hand thread
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
Custom inlet for Graco waterborne fluid hose.
Custom inlet for Graco waterborne fluid hose.
Isolation Enclosure Air Inlet Fitting
1/4 npt
1/4 npt
Isolation Enclosure Fluid Inlet Fitting
3/8 in. OD tube fitting
10 mm OD tube fitting
Wetted Parts
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal, Nylon, Polyethylene, Tungsten Wire. Waterborne Fluid Hose: PTFE. Suction Tube: Polyethylene, Stainless Steel. Merkur Pump: See manual 3A0732.
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal, Nylon, Polyethylene, Tungsten Wire. Waterborne Fluid Hose: PTFE. Suction Tube: Polyethylene, Stainless Steel. Merkur Pump: See manual 3A0732.