Cart
ToughTek M680a CS
ToughTek M680a CS Package, HTX Applicator
Part Number: 27A491
ToughTek M680a CS
ToughTek M680a CS Package, HTX Applicator
Part Number: 27A491
If you are looking to spray fireproofing materials or other water-flush repair mortars in an electric-sensitive environment, the ToughTek M680a CS is the perfect fit. Switch to spraying repair mortars with this air powered system and start saving your business time and money.
Product is Discontinued
Replacement Product Not Available
Features
If you are looking to spray fireproofing materials or other water-flush repair mortars in an electric-sensitive environment, the ToughTek M680a CS is the perfect fit. Switch to spraying repair mortars with this air powered system and start saving your business time and money.
Portable sprayer for mortar, cementitious and heavily filled materials
Primary features:
- Low pressure pumping (13.7 to 34.5 bar/200 to 500 psi) reduces wear on pump lower
- Less material waste and more consistent finish than hand-trowling
- Fast, easy cleaning with high velocity flush
- Can be quickly disassembled for hand cleaning
- Explosion-proof for hazardous spray areas
- One convenient air source to run pump and atomise air
Flex Hose Applicator
- Best for heavily filled materials that easily pack out
- Includes Round Nozzle; provides a rough finish texture
- Simple design, easy to clean
- Order part number 24T947
Pole Applicator
- For hard to reach areas
- Best for heavily filled materials that easily pack out
- Includes Round Nozzle; provides a rough finish texture
- Simple design, easy to clean
- Order part number 24T946
HTX 680 Applicator
- Good for lighter materials that do not typically pack out
- Includes Round Pattern Nozzles; provides a medium round pattern texture finish
- Air mixed into fluid through multiple venturi ports provides a consistent pattern
- Gives a more controlled pattern for lightweight materials or high solids coatings
- Includes flat pattern discs - spreads the pattern out like a fan, giving a wider coverage area per pass
- Order part number 24U209
Large Capacity Hopper
- 95 L (25 gal) hopper kit
- Ideal for materials that require more than 38 litre/10 gal capacity, such as fireproofing
- Boost productivity by minimising refills
- Easily connects to ToughTek M680a
- Easy to connect and manoeuvre
- Order part number 24W889
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Mortar |
|---|---|
| Compatible Material | Cementitious Material |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Section Type | 2-Ball |
| Hopper Capacity (gal) | 10 |
| Material | Repair Mortar |
| Material Output (bags/hr) | 40 |
| Maximum Continuous Cycle Rate (CPM) | 60 |
| Maximum Flow Rate (GPM) | 10.8 |
| Maximum Hose Length (ft) | 100 |
| Maximum Operating Temperature (°F) | 120 |
| Maximum Working Pressure (MPa) | 4.1 |
| Maximum Working Pressure (psi) | 600 |
| Minimum Operating Temperature (°F) | 32 |
| Model | ToughTek |
| Portable | Portable |
| Series | M680a CS |
| Type | Pneumatic piston pump |
| Weight (lb) | 250 |
| Application | Mortar |
| Compatible Material | Cementitious Material |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Outlet Size (mm) | 38.1 |
| Fluid Section Type | 2-Ball |
| Material | Repair Mortar |
| Material Output (bags/hr) | 40 |
| Maximum Continuous Cycle Rate (CPM) | 60 |
| Maximum Flow Rate (L/min) | 41.2 |
| Maximum Operating Temperature (°C) | 49 |
| Maximum Working Pressure (MPa) | 4.1 |
| Maximum Working Pressure (bar) | 41 |
| Maximum Working Pressure (kPa) | 4100 |
| Maximum Working Pressure (psi) | 600 |
| Minimum Operating Temperature (°C) | 0 |
| Model | ToughTek |
| Portable | Portable |
| Series | M680a CS |
| Type | Pneumatic piston pump |
| Weight (kg) | 113 |
Product Manuals
3A5275EN-E, Manual, ToughTek M680a CS Mortar Sprayer, Operation, Repair, Parts, English
(5 MB)
(English Only)
Certifications
Repair Parts
| Part No. | Description |
|---|---|
| M34LN0 | KIT, MOTOR, AIR, 7.5", 4.75 STROK |
