XM50

XM50 Sprayer, Wall Power, Heater, 75 L (20 Gal) Hopper, Heat/Mount/Agitator/5:1 Kits

XM2C26

XM50

XM50 Sprayer, Wall Power, Heater, 75 L (20 Gal) Hopper, Heat/Mount/Agitator/5:1 Kits

XM2C26

Engineered to handle the toughest protective coatings, the Graco XM Plural-Component Sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.

Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure

Engineered to handle the toughest protective coatings, the Graco XM Plural-Component Sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.

Ideally suited for marine, bridge, rail and wind energy applications, the Graco XM is fully configurable for your specific coatings job.

  • New dosing technology assures accurate, on-ratio mixing for better yield and less waste
  • Advanced, intuitive user controls provide real-time display of ratio
  • USB port lets you easily access and download historical spraying data
  • Supports multiple spray guns for added productivity
  • Allows for easy crane transport with eye hooks on air motors
  • Variable ratio system - handles material ratios from 1:1 to 10:1

Specifications & Documents

Technical Specifications

Convert to Imperial
20 gallon heated hopper method 240 V immersion heaters (qty 2)
Air Inlet Size (in) 3/4
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Compatible Material Urethane, Two-Component Epoxy
Component Type Plural-Component
Feed Pumps 5:1 Monarks (qty 2)
Fluid Inlet Size (in) 1-1/4
Fluid Inlet Thread Gender Male
Fluid Inlet Thread Type NPT
Flush Type Solvent
Gun Type Airless Gun
Includes Whip Hose, Static Mixer, XTR Spray Gun, (2) Hopper Kits, (2) Hopper Heater Kits, (2) Hopper Universal Mount Kits, (2) Twistork Agitator Kits, (2) 5:1 Pump Feed Kits
Location Category Non-hazardous location
Material Application Paints, Primers
Maximum Air Consumption (SCFM) 70 scfm/gpm at 100 psi
Maximum Air Inlet Pressure (psi) 150
Maximum Fluid Temperature (°F) 160
Maximum Fluid Viscosity (cP) 20000
Maximum Mix Ratio 10:1
Maximum Operating Temperature (°F) 135
Maximum Working Pressure (MPa) 35.8
Maximum Working Pressure (psi) 5200
Measuring Type Meter
Minimum Flow Rate (GPM) 0.25
Minimum Fluid Viscosity (cP) 200
Minimum Mix Ratio 1:1
Number of Tanks 2
Overall Height (in) 70
Power Source Electric
Primary Fluid Heater Included Yes
Product Type Plural Component
Pump Filter Included No
Remote Mix Manifold Included No
Sound Power Level (dB(A)) 98
Sound Pressure Level (dB(A)) 86
Supply Hoppers 20 gal Hoppers with Agitators (qty 2)
Tank Capacity (gal) 7, 20
Type Plural Component Sprayer
Wetted Material Aluminum, Stainless Steel, Carbide, UHMWPE, PTFE, Nylon, Carbon Steel, Alloy Steel, Zinc Plating, Nickel Plating, Ductile Iron, Tungsten Carbide, Polyethylene, Leather, Polypropylene
20 gallon heated hopper method 240 V immersion heaters (qty 2)
Air Inlet Size (cm) 1.905
Air Inlet Size (mm) 19.05
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Compatible Material Urethane, Two-Component Epoxy
Component Type Plural-Component
Feed Pumps 5:1 Monarks (qty 2)
Fluid Inlet Size (cm) 3.175
Fluid Inlet Size (mm) 31.75
Fluid Inlet Thread Gender Male
Fluid Inlet Thread Type NPT
Flush Type Solvent
Gun Type Airless Gun
Includes Whip Hose, Static Mixer, XTR Spray Gun, (2) Hopper Kits, (2) Hopper Heater Kits, (2) Hopper Universal Mount Kits, (2) Twistork Agitator Kits, (2) 5:1 Pump Feed Kits
Location Category Non-hazardous location
Material Application Paints, Primers
Maximum Air Inlet Pressure (bar) 10.34
Maximum Air Inlet Pressure (kPa) 1034
Maximum Flow Rate (L/min) 11.36
Maximum Fluid Temperature (°C) 71
Maximum Fluid Viscosity (cP) 20000
Maximum Mix Ratio 10:1
Maximum Operating Temperature (°C) 57
Maximum Working Pressure (MPa) 35.8
Maximum Working Pressure (bar) 358
Maximum Working Pressure (kPa) 35800
Maximum flow rate (cc/min) 11360
Measuring Type Meter
Minimum Flow Rate (L/min) 0.95
Minimum Fluid Viscosity (cP) 200
Minimum Mix Ratio 1:1
Minimum flow rate (cc/min) 950
Number of Tanks 2
Overall Height (cm) 177.8
Overall Height (mm) 1778
Power Source Electric
Primary Fluid Heater Included Yes
Product Type Plural Component
Pump Filter Included No
Remote Mix Manifold Included No
Sound Power Level (dB(A)) 98
Sound Pressure Level (dB(A)) 86
Supply Hoppers 20 gal Hoppers with Agitators (qty 2)
Type Plural Component Sprayer
Wetted Material Aluminum, Stainless Steel, Carbide, UHMWPE, PTFE, Nylon, Carbon Steel, Alloy Steel, Zinc Plating, Nickel Plating, Ductile Iron, Tungsten Carbide, Polyethylene, Leather, Polypropylene

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco