From hot-potting to Plural component spraying
Founded in 1975, Snashall Steel Fabrication is a British manufacturer of steel frame structures for a variety of businesses. Their existing paint process was based upon hot-potting of materials via a low pressure single leg pump.
With an increasing production and a growing business, Snashall identified the need to move from hot-potting to plural component spraying.
Efficient coating of steel structures
The local Graco distributor, Elmbridge Supplies, arranged a demonstration of a plural component sprayer, the XP70, configured to the ratio of paint being used. Snashall understood that the use of 2 component equipment would allow faster coating of steel structures and a reduction in waste. The process change would also enable material to be supplied in 200 litre barrels. Following successful tests with the XP70, Snashall commented on the ease of use, increased production levels and improvements to their overall process. However, there was also the possibility that the material needed to be heated and there was a potential demand for a change of material mix ratio.
A fully configurable system
Elmbridge Supplies therefore suggested Graco’s XM70 high-pressure plural component sprayer which allows a variation in material ratio, precise ratio assurance and enhanced reporting of the painting process. The fully configurable XM70 system was installed with a 5:1 feed pump, a single post ram, drum cover and agitator. Snashall commented “The traceability of each job enables us to provide an additional level of quality control to our painting process, as we can now ensure precise ratio spraying.”
EcoQuip confirmed as suitable for explosive atmospheres
Graco’s EcoQuip vapour abrasive blast equipment was thoroughly tested for use in potentially hazardous areas involving explosive atmospheres caused by gases and vapours
Creating a pitted finish on granite with the EcoQuip
The existing kerb in Denman Street, London, UK, was causing damage to a range of high-class vehicles including Bentleys, Rolls-Royces and Jaguars that frequently pulled-up there to drop-off hotel customers. The kerb needed to be modified to prevent additional damage and a cycle path added.
Creative Fabrications cleans Julie Penrose Fountain with EcoQuip 2 Blasting Equipment
Creative Fabrications was recently hired to clean the exterior of the stainless steel Julie Penrose Fountain, located inside America the Beautiful State Park in Colorado Springs, Colorado.