Twice the production for large blasting jobs
A family-run company, Schavicast was started in 1995, but the experience and the workmanship within the company go back even further. Schavicast began as a blasting and painting company for fisheries, and have always invested in expanding their range of products and services, as well as machinery.
Today, the services they deliver are blasting, painting, quality control and total solutions. In addition to a large number of customers in the fishing and maritime industries, Schavicast provides services to government, industry and offshore customers.
Whenever a vessel needs a new layer of paint, repairing or maintenance (for example removing anti-fouling paint), it moors at a shipyard dock in Stellendam, near Rotterdam (Netherlands).
The company was looking for new blasting equipment, mainly because the dust during blasting was too big of a burden. Firstly, operators’ sight was minimised and they could hardly see how they were blasting. Secondly, there’s a marina in front of the shipyard repair dock and they had complaints about dust in their area.
Vapour abrasive blasting as a solution
Local Graco distributor Rasco-Clemco proposed to use two EcoQuip Twinline models to do the job. The reason for this is that it speeds up the job. Using two Twinline units reduce the time that a vessel spends in the dock, which saves money and allows for more boats to arrive at the dock.
An external water tank was also installed. The abrasive used is Coppers Slag with a width ranging from 0.5 to 1.2 mm. It’s an environmentally friendly iron silicate that generates extremely low dust. “It’s a good abrasive to remove primer and topcoat coatings and prepare the substrate for a new application”, says Peet Hack, Head of Marine at Schavicast bv.
Notable dust reduction Currently, Schavicast is saving more than 50% of abrasive material compared to the traditional dry pot method they previously used. Moreover, the operators are feeling more comfortable due to the dust reduction on the application site and also the pollution in the neighbourhood decreased.
EcoQuip confirmed as suitable for explosive atmospheres
Graco’s EcoQuip vapour abrasive blast equipment was thoroughly tested for use in potentially hazardous areas involving explosive atmospheres caused by gases and vapours
Creating a pitted finish on granite with the EcoQuip
The existing kerb in Denman Street, London, UK, was causing damage to a range of high-class vehicles including Bentleys, Rolls-Royces and Jaguars that frequently pulled-up there to drop-off hotel customers. The kerb needed to be modified to prevent additional damage and a cycle path added.
Creative Fabrications cleans Julie Penrose Fountain with EcoQuip 2 Blasting Equipment
Creative Fabrications was recently hired to clean the exterior of the stainless steel Julie Penrose Fountain, located inside America the Beautiful State Park in Colorado Springs, Colorado.