i-Series 1"

1 in. (25.4 mm) i-Series Polypropylene Pulsation Dampener with PP Seats and PS Diaphragm

Part Number: 26D885

product image

i-Series 1"

1 in. (25.4 mm) i-Series Polypropylene Pulsation Dampener with PP Seats and PS Diaphragm

Part Number: 26D885

Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process
Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure
Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process

Excess pulsation causes noise, plumbing damage and even product degradation. Dampeners reduce pulsation and vibration, extending the life of your system while maintaining the integrity of the material being pumped.

  • Controlled pulsation for more consistent flow, while minimising system vibration. Creating a safer work environment.
  • Reduce stress on equipment which improves equipment life, resulting in less maintenance. Absorbing surges and reducing spikes in pressure relieves stress on your pump and system.
  • Minimises potential fluid shearing; improves product quality, reducing cost.

Specifications & Documents

Technical Specifications

Convert to Imperial
Connection Type Flange
Diaphragm Material PTFE/Santoprene 2-piece
Fluid Section Material Polypropylene
Hazardous location approved None
Inlet Size (in) 1
Maximum Flow Rate (GPM) 50
Maximum Fluid Pressure (MPa) 0.69
Maximum Fluid Pressure (psi) 100
Maximum fluid operating temperature (°C) 66
Maximum fluid operating temperature (°F) 150
Minimum fluid operating temperature (°C) 0
Minimum fluid operating temperature (°F) 32
Model i-Series
Outlet Size (in) 1
Seat Material Polypropylene
Series 1"
Type Pulsation Dampener
Wetted Material Polypropylene
Connection Type Flange
Diaphragm Material PTFE/Santoprene 2-piece
Fluid Section Material Polypropylene
Hazardous location approved None
Inlet Size (cm) 2.54
Inlet Size (in) 1
Inlet Size (mm) 25.4
Maximum Flow Rate (L/min) 189
Maximum Fluid Pressure (MPa) 0.69
Maximum Fluid Pressure (bar) 6.9
Maximum Fluid Pressure (kPa) 689
Maximum Fluid Pressure (psi) 100
Maximum fluid operating temperature (°C) 66
Maximum fluid operating temperature (°F) 150
Minimum fluid operating temperature (°C) 0
Minimum fluid operating temperature (°F) 32
Model i-Series
Outlet Size (cm) 2.54
Outlet Size (in) 1
Outlet Size (mm) 25.4
Seat Material Polypropylene
Series 1"
Type Pulsation Dampener
Wetted Material Polypropylene

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco