Husky 1050e

Husky 1050 PP Pump, 120V Comp, BLDC Motor, End Flange, Al Ctr Sct, PP Seats, PTFE Balls & PTFE/Santoprene Diaph

Part Number: 650110

product image

Husky 1050e

Husky 1050 PP Pump, 120V Comp, BLDC Motor, End Flange, Al Ctr Sct, PP Seats, PTFE Balls & PTFE/Santoprene Diaph

Part Number: 650110

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

  • Durable Pump Technology

    • Handles slurries and abrasives all without damage to the pump
    • Gentle on shear sensitive material
  • Diaphragm Pump

    • Runs dry
    • No rotating or moving fluid seals
    • Self-priming
  • Electric Drive

    • Reduce energy consumption and operating costs
    • Increase pump control
    • Accurately meter fluid
  • Fluid Section

    • Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms
  • Patent Pending Air Charged Drive

    • Increase diaphragm life without compromising your fluid
    • Ability to reduce pulsation on fluid outlet
    • Stalls under pressure without additional switches and controls
  • Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
  • Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

Specifications & Documents

Technical Specifications

Convert to Imperial
Air Inlet Size (in) 3/8
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Industrial
Ball Material PTFE
Centre Section Material Aluminium
Compatible Material Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solventborne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
Connection Type End Flange ANSI/DIN
Diaphragm Material PTFE/Santoprene 2-piece
Diaphragm compatible material PTFE
Fluid Inlet Size (in) 1
Fluid Outlet Size (in) 1
Fluid Section Material Polypropylene
Manifold Configuration End Port
Manifold O-Ring Material PTFE
Material Polypropylene
Maximum Air Pressure (MPa) 0.55
Maximum Air Pressure (psi) 80
Maximum Amperage (A) 5.2
Maximum Cycle Rate (CPM) 280
Maximum Flow Rate (GPM) 42
Maximum Fluid Pressure (MPa) 0.48
Maximum Fluid Pressure (psi) 70
Maximum Motor Speed (RPM) 3600
Maximum Operating Temperature (°F) 104
Maximum Solid Size (in) 0.125
Maximum Storage Temperature (°F) 104
Minimum Operating Temperature (°F) 32
Minimum Storage Temperature (°F) 32
Model Husky
Motor Type Brushless DC
Power Rating (HP) 2.2
Power Source Electric
Seat Material Polypropylene
Series 1050e
Type Electric Diaphragm Pump
Voltage (V ac) 320
Weight (lb) 87.5
Air Inlet Size (in) 3/8
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Industrial
Ball Material PTFE
Centre Section Material Aluminium
Compatible Material Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solventborne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
Connection Type End Flange ANSI/DIN
Diaphragm Material PTFE/Santoprene 2-piece
Diaphragm compatible material PTFE
Fluid Inlet Size (cm) 2.54
Fluid Inlet Size (in) 1
Fluid Inlet Size (mm) 25.4
Fluid Outlet Size (cm) 2.54
Fluid Outlet Size (in) 1
Fluid Outlet Size (mm) 25.4
Fluid Section Material Polypropylene
Manifold Configuration End Port
Manifold O-Ring Material PTFE
Material Polypropylene
Maximum Air Pressure (MPa) 0.55
Maximum Air Pressure (bar) 5.5
Maximum Air Pressure (kPa) 550
Maximum Air Pressure (psi) 80
Maximum Amperage (A) 5.2
Maximum Cycle Rate (CPM) 280
Maximum Flow Rate (L/min) 159
Maximum Fluid Pressure (MPa) 0.48
Maximum Fluid Pressure (bar) 4.8
Maximum Fluid Pressure (kPa) 480
Maximum Fluid Pressure (psi) 70
Maximum Motor Speed (RPM) 3600
Maximum Operating Temperature (°C) 40
Maximum Solid Size (cm) 0.3175
Maximum Solid Size (mm) 3.175
Maximum Storage Temperature (°C) 40
Minimum Operating Temperature (°C) 0
Minimum Storage Temperature (°C) 0
Model Husky
Motor Type Brushless DC
Power Source Electric
Seat Material Polypropylene
Series 1050e
Type Electric Diaphragm Pump
Voltage (V ac) 320

Repair Parts

Part No. Description
24Y525 KIT,CENTER SCECTION (ALUM)
24Y624 KIT,EODD CTR. SECTION REPAIR
24B635 KIT,SEAT 1050 PP
24Y524 KIT,SHAFT ASSEMBLY
24B645 KIT,1050,PTFE, BALL
24F926 KIT,DIAPHRAGM-E1 PS

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco