Wolverine C1D1

Wolverine® Hazardous Location C1D1 Pump, 24 VDC, Simplex, 5/8 in. Plunger, HNBR Seals

Part Number: A27319

Wolverine C1D1

Wolverine® Hazardous Location C1D1 Pump, 24 VDC, Simplex, 5/8 in. Plunger, HNBR Seals

Part Number: A27319

Protecting well sites and pipelines from corrosion, plugging, and freezing. Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging and freezing.

Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure

(English Only)

Protecting well sites and pipelines from corrosion, plugging, and freezing. Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging and freezing.

  • Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.
  • Our injection pumps are designed for up to two years of operation before simple repairs.
  • Each pump features an adjustable fluid packing that lasts up to 25 times longer than non-adjustable seals.
  • Designed to operate in environments from -40°C to 79°C (-40° F to 175°F). They have 316 SST wetted parts, plus they’re sealed against water and dust.
  • Flow rates up to 1,628 lpd (430 gpd) and a pressure rating up to 686 bar, 68.9 MPa (10,000 psi).
  • Long-lasting seals can easily be replaced in less than ten minutes, on location.
  • Precision stroke adjustment between 1/2 in. to 1 in. ensures accurate injection rates.
  • HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.
  • Low friction drivetrain to optimise electrical efficiency, reducing the load on your power system.

(English Only)

Specifications & Documents

Technical Specifications

Convert to Imperial
Application Hazardous Location
Compatible Material Corrosion Inhibitors, Methanol, Scavengers
Fluid Inlet Size (in) 1/4
Fluid Inlet Thread Gender Female
Fluid Inlet Thread Type NPT
Fluid Outlet Size (in) 1/4
Fluid Outlet Thread Gender Female
Fluid Outlet Thread Type NPT
Maximum Continuous Cycle Rate (CPM) 60
Maximum Flow Rate (GPD) 103
Maximum Fluid Working Pressure (psi) 900
Maximum Operating Temperature (°F) 104
Maximum Working Pressure (MPa) 6.2
Maximum Working Pressure (psi) 900
Minimum Operating Temperature (°F) -13
Model Wolverine
Motor Type Class 1, Division 1
Number of Fluid Heads 1
Plunger Material Chromex-Coated 17-4 PH Stainless
Plunger Size (in) 5/8
Power Rating (HP) 1/5
Seal Material HNBR
Series C1D1
Type Electric chemical pump
Voltage 24 VDC
Voltage (V dc) 24
Application Hazardous Location
Compatible Material Corrosion Inhibitors, Methanol, Scavengers
Fluid Inlet Thread Gender Female
Fluid Inlet Thread Type NPT
Fluid Outlet Size (cm) 0.635
Fluid Outlet Size (mm) 6.35
Fluid Outlet Thread Gender Female
Fluid Outlet Thread Type NPT
Maximum Continuous Cycle Rate (CPM) 60
Maximum Flow Rate (L/day) 390
Maximum Operating Temperature (°C) 40
Maximum Working Pressure (MPa) 6.2
Maximum Working Pressure (bar) 62
Maximum Working Pressure (kPa) 6200
Minimum Operating Temperature (°C) -25
Model Wolverine
Motor Type Class 1, Division 1
Number of Fluid Heads 1
Plunger Material Chromex-Coated 17-4 PH Stainless
Plunger Size (cm) 1.6
Plunger Size (mm) 15.9
Power Rating (HP) 1/5
Seal Material HNBR
Series C1D1
Type Electric chemical pump
Voltage 24 VDC
Voltage (V dc) 24

Sales Literature

3G0001EN ONG Buyer's Guide (13 MB)
(English Only)

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Call Support

Call Support

Monday - Friday
7:30 a.m.- 5 p.m.
UTC -6h
(USA Central Time)

Email Support

Email Support

Contact an Expert

Contact an Expert

We'll help you choose the right product for your use.

Graco