Cart
Wolverine C1D1
Wolverine® Hazardous Location C1D1 Pump, 24 VDC, Duplex, 1/2 in. Plunger, FFKM Seals
Part Number: A27349
Wolverine C1D1
Wolverine® Hazardous Location C1D1 Pump, 24 VDC, Duplex, 1/2 in. Plunger, FFKM Seals
Part Number: A27349
Protecting well sites and pipelines from corrosion, plugging, and freezing. Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging and freezing.
Features
Product Brochure
(English Only)
Protecting well sites and pipelines from corrosion, plugging, and freezing. Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging and freezing.
- Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.
- Our injection pumps are designed for up to two years of operation before simple repairs.
- Each pump features an adjustable fluid packing that lasts up to 25 times longer than non-adjustable seals.
- Designed to operate in environments from -40°C to 79°C (-40° F to 175°F). They have 316 SST wetted parts, plus they’re sealed against water and dust.
- Flow rates up to 1,628 lpd (430 gpd) and a pressure rating up to 686 bar, 68.9 MPa (10,000 psi).
- Long-lasting seals can easily be replaced in less than ten minutes, on location.
- Precision stroke adjustment between 1/2 in. to 1 in. ensures accurate injection rates.
- HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.
- Low friction drivetrain to optimise electrical efficiency, reducing the load on your power system.
(English Only)
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Hazardous Location |
|---|---|
| Compatible Material | Corrosion Inhibitors, Methanol, Scavengers |
| Fluid Inlet Size (in) | 1/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Maximum Continuous Cycle Rate (CPM) | 60 |
| Maximum Flow Rate (GPD) | 125 |
| Maximum Fluid Working Pressure (psi) | 1250 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 8.6 |
| Maximum Working Pressure (psi) | 1250 |
| Minimum Operating Temperature (°F) | -13 |
| Model | Wolverine |
| Motor Type | Class 1, Division 1 |
| Number of Fluid Heads | 2 |
| Plunger Material | Chromex-Coated 17-4 PH Stainless |
| Plunger Size (in) | 1/2 |
| Power Rating (HP) | 1/5 |
| Seal Material | FFKM |
| Series | C1D1 |
| Type | Electric chemical pump |
| Voltage | 24 VDC |
| Voltage (V dc) | 24 |
| Application | Hazardous Location |
| Compatible Material | Corrosion Inhibitors, Methanol, Scavengers |
| Fluid Inlet Size (in) | 1/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (cm) | 0.635 |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Size (mm) | 6.35 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Maximum Continuous Cycle Rate (CPM) | 60 |
| Maximum Flow Rate (L/day) | 473 |
| Maximum Fluid Working Pressure (psi) | 1250 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 8.6 |
| Maximum Working Pressure (bar) | 86 |
| Maximum Working Pressure (kPa) | 8600 |
| Maximum Working Pressure (psi) | 1250 |
| Minimum Operating Temperature (°C) | -25 |
| Model | Wolverine |
| Motor Type | Class 1, Division 1 |
| Number of Fluid Heads | 2 |
| Plunger Material | Chromex-Coated 17-4 PH Stainless |
| Plunger Size (cm) | 1.3 |
| Plunger Size (mm) | 12.7 |
| Seal Material | FFKM |
| Series | C1D1 |
| Type | Electric chemical pump |
| Voltage | 24 VDC |
| Voltage (V dc) | 24 |
Product Manuals
Sales Literature
