Cart
ProMix PD2K
ProMix PD2K Automatic Proportioner, Dual Panel, Control Module Only
Part Number: AC0502
Image is for illustrative purposes only.
ProMix PD2K
ProMix PD2K Automatic Proportioner, Dual Panel, Control Module Only
Part Number: AC0502
100% positive displacement technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster colour changes, less material usage and lower disposal c...
More Info
Features
Product Brochure
100% positive displacement technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster colour changes, less material usage and lower disposal costs overall.
- Up to 80% reduction in flushing waste compared to the most efficient traditional proportioning systems
- Faster colour changes and less material to flush mean less waste and less downtime
- Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
- Proportion both epoxy and urethane with one system
- Field serviceable in less than 20 minutes – no need for costly factory rebuilds such as gear pumps
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Inlet Size (in) | 3/8 |
|---|---|
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Applicator Type | Automatic |
| Component Type | Single Component |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Activation | Automatic |
| Material Type | Single Component |
| Maximum Mix Ratio | 50:1 |
| Maximum Number of Colours | Up to 16 |
| Maximum Working Pressure (MPa) | 0.7 |
| Maximum Working Pressure (psi) | 100 |
| Measuring Type | Meter |
| Minimum Mix Ratio | 0.1:1 |
| Mix Accuracy (%) | 1 |
| Model | ProMix |
| Number of Catalysts | Up to 4 |
| Number of Colour Valves | N/A |
| Number of Resin Colours | Up to 30 |
| Power Source | Electric |
| Pressure Type | Low or High Pressure |
| Proportioner Type | Automatic |
| Proportioning Type | Automatic Electronic |
| Series | PD2K |
| Type | Proportioning System |
| Wetted Material | Stainless Steel, Tungsten Carbide, Perfluoroelastomer, PTFE, PPS, UHMWPE |
| Air Inlet Size (cm) | 0.9525 |
| Air Inlet Size (in) | 3/8 |
| Air Inlet Size (mm) | 9.525 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Applicator Type | Automatic |
| Component Type | Single Component |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Activation | Automatic |
| Material Type | Single Component |
| Maximum Mix Ratio | 50:1 |
| Maximum Number of Colours | Up to 16 |
| Maximum Working Pressure (MPa) | 0.7 |
| Maximum Working Pressure (bar) | 7 |
| Maximum Working Pressure (kPa) | 700 |
| Maximum Working Pressure (psi) | 100 |
| Measuring Type | Meter |
| Minimum Mix Ratio | 0.1:1 |
| Mix Accuracy (%) | 1 |
| Model | ProMix |
| Number of Catalysts | Up to 4 |
| Number of Colour Valves | N/A |
| Number of Resin Colours | Up to 30 |
| Power Source | Electric |
| Pressure Type | Low or High Pressure |
| Proportioner Type | Automatic |
| Proportioning Type | Automatic Electronic |
| Series | PD2K |
| Type | Proportioning System |
| Wetted Material | Stainless Steel, Tungsten Carbide, Perfluoroelastomer, PTFE, PPS, UHMWPE |
Product Manuals
3A3180A, ProMix PD2K Modbus TCP Installation Kit, Instructions - Parts, English
(766 KB)
(English Only)
407072B, Electrostatic Air Hose Quick Disconnect Kit, Instructions/Parts, English
(608 KB)
(English Only)
CAD Drawings
AC0502-3D-EN.zip
(3 MB)
