Husky 515

Husky 515 Polypropylene (1/2 in. BSP) Standard Pump, Polypropylene Centre Section, Stainless Steel Seats, PTFE Balls & PTFE Diaph

Part Number: D5B311

product image

Husky 515

Husky 515 Polypropylene (1/2 in. BSP) Standard Pump, Polypropylene Centre Section, Stainless Steel Seats, PTFE Balls & PTFE Diaph

Part Number: D5B311

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

  • Centre and end porting options.
  • No mechanical seals to cause fluid leaks or failures
  • Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
  • Easy-to-service air valve and ball checks
  • Operates on as little as 1.4 bar, 0.14 MPa (20 psi)
  • Split manifold option to pump multiple fluids without mixing
  • Delivery up to 56.7 lpm (15 gpm)
  • Easy-to-service air valve and ball checks
  • Reliable air valve for years of dependable performance

Specifications & Documents

Technical Specifications

Convert to Imperial
Air Exhaust Port Size (in) 3/8
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Size (in) 1/4
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Industrial
Ball Material PTFE
Centre Section Material Polypropylene
Compatible Material Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink
Connection Type Threaded
Diaphragm Material PTFE/EPDM 2-Piece
Diaphragm compatible material PTFE
Fluid Inlet Size (in) 1/2
Fluid Inlet Thread Type BSPT
Fluid Outlet Size (in) 1/2
Fluid Outlet Thread Type BSPT
Fluid Section Material Polypropylene
Manifold Configuration Centre Port
Manifold O-Ring Material PTFE
Material Polypropylene
Maximum Air Consumption (SCFM) 28
Maximum Air Pressure (MPa) 0.7
Maximum Air Pressure (psi) 100
Maximum Cycle Rate (CPM) 400
Maximum Flow Rate (GPM) 15
Maximum Fluid Pressure (MPa) 0.7
Maximum Fluid Pressure (psi) 100
Maximum Operating Temperature (°F) 220
Maximum Solid Size (in) 0.09375
Minimum Operating Temperature (°F) 40
Model Husky
Overall Height (in) 10.63
Power Source Air
Seat Material Stainless Steel
Series 515
Standards Met ATEX, CE
Type Pneumatic diaphragm pump selector
Weight (lb) 6.5
Wetted Material Polypropylene, Stainless Steel, PTFE/EPDM
Air Exhaust Port Size (in) 3/8
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Size (in) 1/4
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Industrial
Ball Material PTFE
Centre Section Material Polypropylene
Compatible Material Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink
Connection Type Threaded
Diaphragm Material PTFE/EPDM 2-Piece
Diaphragm compatible material PTFE
Fluid Inlet Size (cm) 1.27
Fluid Inlet Size (in) 1/2
Fluid Inlet Size (mm) 12.7
Fluid Inlet Thread Type BSPT
Fluid Outlet Size (cm) 1.27
Fluid Outlet Size (in) 1/2
Fluid Outlet Size (mm) 12.7
Fluid Outlet Thread Type BSPT
Fluid Section Material Polypropylene
Manifold Configuration Centre Port
Manifold O-Ring Material PTFE
Material Polypropylene
Maximum Air Pressure (MPa) 0.7
Maximum Air Pressure (bar) 7
Maximum Air Pressure (kPa) 700
Maximum Air Pressure (psi) 100
Maximum Cycle Rate (CPM) 400
Maximum Flow Rate (L/min) 56.8
Maximum Fluid Pressure (MPa) 0.7
Maximum Fluid Pressure (bar) 7
Maximum Fluid Pressure (kPa) 700
Maximum Fluid Pressure (psi) 100
Maximum Operating Temperature (°C) 104
Maximum Solid Size (cm) 0.2383
Maximum Solid Size (mm) 2.4
Minimum Operating Temperature (°C) 4
Model Husky
Power Source Air
Seat Material Stainless Steel
Series 515
Standards Met ATEX, CE
Type Pneumatic diaphragm pump selector
Wetted Material Polypropylene, Stainless Steel, PTFE/EPDM

Repair Parts

Part No. Description
D05001 KIT,DIAPHRAGM-C1 PT
D05300 KIT,SEAT 515/715 SS
241657 KIT, REPAIR, AIR VALVE
D05010 KIT,BALL-C1 PT
D05311 KIT,515/715 IN SS,PT,PT,FKPT

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco