Cart
SaniForce 3150 3A
SaniForce 3150 HS 3A Approved Pump with PTFE Ball, Overmoulded EPDM Diaphragm & 3 in. Inlet/Outlet
Part Number: SA3AAA
SaniForce 3150 3A
SaniForce 3150 HS 3A Approved Pump with PTFE Ball, Overmoulded EPDM Diaphragm & 3 in. Inlet/Outlet
Part Number: SA3AAA
The SaniForce 3150 3A double diaphragm pump is designed to meet the stringent sanitation requirements of the dairy industry. Mounted on a floor stand and equipped with a leak detector, the 3150 3A sanitary pump can be rotated 360° to drain any excess sanitation chemicals.
Features
Product Brochure
The SaniForce 3150 3A double diaphragm pump is designed to meet the stringent sanitation requirements of the dairy industry. Mounted on a floor stand and equipped with a leak detector, the 3150 3A sanitary pump can be rotated 360° to drain any excess sanitation chemicals.
Up to a 10 cm (4.0 in.) tri-clamp connection, this easy to clean, quick knockdown air-operated double diaphragm sanitary pump has flow rates up to 568 lpm (150 gpm) and is 3A certified.
SaniForce 3150 3A Double Diaphragm Pump:
- Pumps up to 567 lpm (150 gpm)
- Pump rotates 360° for easy draining
- The only 7.62 cm (3 in.) pump certified by 3A for dairy applications
- Featuring our lube free, non-sticking air valve
- Transfer product from a variety of containers to smaller receptacles - up to 20,000 cps
- Suitable to pump products such as: flowable sour cream, yoghurt and flowable cheese spreads
Designed to detect leaks!
- Electronic leak detector is standard on the 3150 3A models
- Designed to detect leaks caused when a diaphragm fails
- Sounds a built-in audio alarm and signals external shut down of the pump to prevent damage
- Uses an optical and conductivity sensor to ensure the utmost reliability
- Powered by either 24v or 110/220v
EPDM Overmoulded Diaphragms:
- Approved for 3A applications
- Easy cleaning with smooth, flat surfaces and no recessed areas
- No exposed diaphragm plates to reduce contaminant collection
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Exhaust Port Size (in) | 3/4 |
|---|---|
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | PTFE |
| Centre Section Material | Stainless Steel |
| Compatible Material | Food, Personal Care, Pharmaceutical |
| Connection Type | Tri-Clamp |
| Diaphragm Material | EPDM overmould |
| Diaphragm compatible material | EPDM |
| Fluid Inlet Size (in) | 3 |
| Fluid Outlet Size (in) | 3 |
| Fluid Section Material | Stainless Steel |
| For Use With | Food, Personal Care, Pharmaceutical |
| Includes | Leak Detector, Pump Stand |
| Manifold Configuration | Centre Port |
| Manifold O-Ring Material | EPDM |
| Material | Stainless Steel |
| Maximum Air Consumption (SCFM) | 175 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 145 |
| Maximum Flow Rate (GPM) | 160 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (in) | 1 |
| Model | SaniForce |
| Power Source | Air |
| Pump Ratio | 1:1 |
| Seat Material | Stainless Steel |
| Series | 3150 3A |
| Standards Met | ATEX, CE, 3A, FDA compliant materials |
| Type | Pneumatic diaphragm pump selector |
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | PTFE |
| Centre Section Material | Stainless Steel |
| Compatible Material | Food, Personal Care, Pharmaceutical |
| Connection Type | Tri-Clamp |
| Diaphragm Material | EPDM overmould |
| Diaphragm compatible material | EPDM |
| Fluid Inlet Size (cm) | 7.62 |
| Fluid Inlet Size (in) | 3 |
| Fluid Inlet Size (mm) | 76.2 |
| Fluid Outlet Size (cm) | 7.62 |
| Fluid Outlet Size (in) | 3 |
| Fluid Outlet Size (mm) | 76.2 |
| Fluid Section Material | Stainless Steel |
| For Use With | Food, Personal Care, Pharmaceutical |
| Includes | Leak Detector, Pump Stand |
| Manifold Configuration | Centre Port |
| Manifold O-Ring Material | EPDM |
| Material | Stainless Steel |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 145 |
| Maximum Flow Rate (L/min) | 606 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 2.54 |
| Maximum Solid Size (mm) | 25.4 |
| Model | SaniForce |
| Power Source | Air |
| Pump Ratio | 1:1 |
| Seat Material | Stainless Steel |
| Series | 3150 3A |
| Standards Met | ATEX, CE, 3A, FDA compliant materials |
| Type | Pneumatic diaphragm pump selector |
Product Manuals
Sales Literature
