SaniForce 3150 3A

SaniForce 3150 HS 3A Approved Pump with PTFE Ball, Overmoulded EPDM Diaphragm 3 in. Inlet & 2 in. Outlet

SA5AAA

SaniForce 3150 3A

SaniForce 3150 HS 3A Approved Pump with PTFE Ball, Overmoulded EPDM Diaphragm 3 in. Inlet & 2 in. Outlet

SA5AAA

The SaniForce 3150 3A double diaphragm pump is designed to meet the stringent sanitation requirements of the dairy industry. Mounted on a floor stand and equipped with a leak detector, the 3150 3A sanitary pump can be rotated 360° to drain any excess sanitation chemicals.

Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure

The SaniForce 3150 3A double diaphragm pump is designed to meet the stringent sanitation requirements of the dairy industry. Mounted on a floor stand and equipped with a leak detector, the 3150 3A sanitary pump can be rotated 360° to drain any excess sanitation chemicals.

Up to a 10 cm (4.0 in.) tri-clamp connection, this easy to clean, quick knockdown air-operated double diaphragm sanitary pump has flow rates up to 568 lpm (150 gpm) and is 3A certified.

  • SaniForce 3150 3A Double Diaphragm Pump:

    • Pumps up to 567 lpm (150 gpm)
    • Pump rotates 360° for easy draining
    • The only 7.62 cm (3 in.) pump certified by 3A for dairy applications
    • Featuring our lube free, non-sticking air valve
    • Transfer product from a variety of containers to smaller receptacles - up to 20,000 cps
    • Suitable to pump products such as: flowable sour cream, yoghurt and flowable cheese spreads
  • Designed to detect leaks!

    • Electronic leak detector is standard on the 3150 3A models
    • Designed to detect leaks caused when a diaphragm fails
    • Sounds a built-in audio alarm and signals external shut down of the pump to prevent damage
    • Uses an optical and conductivity sensor to ensure the utmost reliability
    • Powered by either 24v or 110/220v
  • EPDM Overmoulded Diaphragms:

    • Approved for 3A applications
    • Easy cleaning with smooth, flat surfaces and no recessed areas
    • No exposed diaphragm plates to reduce contaminant collection

Specifications & Documents

Technical Specifications

Convert to Imperial
Air Exhaust Port Size (in) 3/4
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Size (in) 1/2
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Sanitary
Ball Material PTFE
Centre Section Material Stainless Steel
Compatible Material Food, Personal Care, Pharmaceutical
Connection Type Tri-Clamp
Diaphragm Material EPDM overmould
Fluid Inlet Size (in) 3
Fluid Outlet Size (in) 3
Fluid Section Material Stainless Steel
For Use With Food, Personal Care, Pharmaceutical
Includes Leak Detector, Pump Stand
Manifold Configuration Center Port
Manifold O-Ring Material EPDM
Material Stainless Steel
Maximum Air Consumption (SCFM) 175
Maximum Air Pressure (MPa) 0.8
Maximum Air Pressure (psi) 120
Maximum Cycle Rate (CPM) 145
Maximum Fluid Pressure (MPa) 0.8
Maximum Fluid Pressure (psi) 120
Maximum Solid Size (in) 1
Power Source Air
Seat Material Stainless Steel
Standards Met ATEX, CE, 3A, FDA
Type Pneumatic Diaphragm Pump
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Sanitary
Ball Material PTFE
Centre Section Material Stainless Steel
Compatible Material Food, Personal Care, Pharmaceutical
Connection Type Tri-Clamp
Diaphragm Material EPDM overmould
Fluid Inlet Size (cm) 7.62
Fluid Inlet Size (mm) 76.2
Fluid Outlet Size (cm) 7.62
Fluid Outlet Size (mm) 76.2
Fluid Section Material Stainless Steel
For Use With Food, Personal Care, Pharmaceutical
Includes Leak Detector, Pump Stand
Manifold Configuration Center Port
Manifold O-Ring Material EPDM
Material Stainless Steel
Maximum Air Pressure (MPa) 0.8
Maximum Air Pressure (bar) 8
Maximum Air Pressure (kPa) 800
Maximum Cycle Rate (CPM) 145
Maximum Flow Rate (L/min) 606
Maximum Fluid Pressure (MPa) 0.8
Maximum Fluid Pressure (bar) 8
Maximum Fluid Pressure (kPa) 800
Maximum Solid Size (cm) 2.54
Maximum Solid Size (mm) 25.4
Power Source Air
Seat Material Stainless Steel
Standards Met ATEX, CE, 3A, FDA
Type Pneumatic Diaphragm Pump

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco