SaniForce 2150 HS

SaniForce 2150, 51 mm (2") HS SST Pneumatic Diaphragm Pump, SS Centre, SS Seats, EP Balls, EO Diaphragms

Part Number: SP2B.0165

product image

SaniForce 2150 HS

SaniForce 2150, 51 mm (2") HS SST Pneumatic Diaphragm Pump, SS Centre, SS Seats, EP Balls, EO Diaphragms

Part Number: SP2B.0165

Graco's SaniForce 2150, 51 mm (2-inch) air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 681 lpm (180 gpm). It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure
Graco's SaniForce 2150, 51 mm (2-inch) air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 681 lpm (180 gpm). It offers a quick knock-down design for easy cleaning and a low cost of ownership.

Ideal for the food processing and personal care markets. Common applications include the high volume evacuation of liquid concentrates from holding vessels or the repackaging of fluids from the original container to smaller receptacles. Suitable for pumping such products as: flavourings, purées, sauces and other low to medium viscosity materials.

  • 51 mm (2 inch) sanitary pump with flow rates up to 681 lpm (180 gpm) and pressures up to 8 bar (120 psi)
  • The seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
  • Graco double diaphragm pumps stall under pressure, which prevents pump failures from clogged lines or closed valves
  • Externally serviceable air valves deliver leading efficiency and reduce downtime.
  • Equipped with inlet and outlet tri-clamp connections, which offer a quick knock-down design for easy cleaning and a swift maintenance process
  • EPDM overmoulded diaphragm design reduces areas that harbour bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
  • Optional leak sensors notify users when processes may be compromised
  • 316 L stainless steel wetted section
  • All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
  • Pass solids up to 12.7 mm (0.5 in.)

Specifications & Documents

Technical Specifications

Convert to Imperial
5
2150HS.PS01ASSASSEPEOEP31
Air Exhaust Port Size (in) 3/4
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Size (in) 1/2
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Sanitary
Ball Material EPDM
Centre Section Material Stainless Steel
Compatible Material Edible oil, Food, Personal care
Compressor required Yes
Connection Type Tri-Clamp
Diaphragm Material EPDM overmould
Fluid Section Material 316L stainless steel
Fluid passage size (in) 2
Fluid passage size (mm) 50
For Use With Food and Personal Care
Hazardous location approved ATEX, IECEx
Manifold Configuration Centre Port
Manifold O-Ring Material EPDM
Material Stainless Steel
Material certification EN 1024:2004 type 3.1 (serialised)
Maximum Air Consumption (SCFM) 200
Maximum Air Pressure (MPa) 0.8
Maximum Air Pressure (psi) 120
Maximum Cycle Rate (CPM) 135
Maximum Flow Rate (GPM) 180
Maximum Fluid Pressure (MPa) 0.8
Maximum Fluid Pressure (psi) 120
Maximum Solid Size (in) 0.5
Maximum fluid operating temperature (°C) 121
Maximum fluid operating temperature (°F) 250
Minimum fluid operating temperature (°C) -40
Minimum fluid operating temperature (°F) -40
Model SaniForce
Overall Height (in) 35.7
Power Source Pneumatic
Pump Ratio 1:1
Pump Type High sanitation
Seat Material 316 Stainless Steel
Series 2150 HS
Standards Met FDA compliant materials, EC 1935/2004
Surface finish: 32 Ra
Tri-Clamp connection size 2-inch
Type Pneumatic diaphragm pump selector
Weight (lb) 111
5
2150HS.PS01ASSASSEPEOEP31
Air Exhaust Port Size (in) 3/4
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Size (in) 1/2
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Sanitary
Ball Material EPDM
Centre Section Material Stainless Steel
Compatible Material Edible oil, Food, Personal care
Compressor required Yes
Connection Type Tri-Clamp
Diaphragm Material EPDM overmould
Fluid Section Material 316L stainless steel
Fluid passage size (in) 2
Fluid passage size (mm) 50
For Use With Food and Personal Care
Hazardous location approved ATEX, IECEx
Manifold Configuration Centre Port
Manifold O-Ring Material EPDM
Material Stainless Steel
Material certification EN 1024:2004 type 3.1 (serialised)
Maximum Air Pressure (MPa) 0.8
Maximum Air Pressure (bar) 8
Maximum Air Pressure (kPa) 800
Maximum Air Pressure (psi) 120
Maximum Cycle Rate (CPM) 135
Maximum Flow Rate (L/min) 681
Maximum Fluid Pressure (MPa) 0.8
Maximum Fluid Pressure (bar) 8
Maximum Fluid Pressure (kPa) 800
Maximum Fluid Pressure (psi) 120
Maximum Solid Size (cm) 1.27
Maximum Solid Size (mm) 12.7
Maximum fluid operating temperature (°C) 121
Maximum fluid operating temperature (°F) 250
Minimum fluid operating temperature (°C) -40
Minimum fluid operating temperature (°F) -40
Model SaniForce
Power Source Pneumatic
Pump Ratio 1:1
Pump Type High sanitation
Seat Material 316 Stainless Steel
Series 2150 HS
Standards Met FDA compliant materials, EC 1935/2004
Surface finish: 32 Ra
Tri-Clamp connection size 2-inch
Type Pneumatic diaphragm pump selector

Repair Parts

Part No. Description
25R709 KIT,2150HS-PH --,EP,EO,EP
26B350 KIT,BALL-H1 EP
25P270 KIT,DIAPHRAGM-H1 EO

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco