68:1 Ratio 4 Zone Tandem Melt System with EPDM Wiper Plate
TW2L6R
68:1 Ratio 4 Zone Tandem Melt System with EPDM Wiper Plate
TW2L6R
Designed specifically for sealants or adhesives that need to be warmed up to 100°C (212°F), Graco Warm Melt Supply Systems deliver superior temperature control. An excellent alternative to water-jacketed solutions.
Features
Product Brochure
Designed specifically for sealants or adhesives that need to be warmed up to 100°C (212°F), Graco Warm Melt Supply Systems deliver superior temperature control. An excellent alternative to water-jacketed solutions.
Bulk unloader for warm melt materials and temperature conditioning applications.
- Bridges the gap between hot melt and ambient supply systems
- Modular approach provides easy snap-on installation and eliminates complex point-to-point wiring
- Intuitive, easy-to-use interface
- Configurable to fit your unique application and material
Specifications & Documents
Technical Specifications
Convert to Imperial| Ambient/Warm Melt/Hot Melt | Warm Melt |
|---|---|
| Application | Bonding, Sealing, Gasketing, Fluid Transfer, Unloading |
| Container Type | Pail |
| Control Panel Type | Enclosed |
| Material Container Volume (gal) | 52.8 |
| Maximum Air Inlet Pressure (psi) | 150 |
| Maximum Flow Rate (GPM) | 3.2 |
| Maximum Fluid Pressure (psi) | 6200 |
| Maximum Height (ft) | 3.08 |
| Maximum Height (in) | 37 |
| Maximum Operating Temperature (°F) | 158 |
| Maximum Working Pressure (MPa) | 43.4 |
| Maximum Working Pressure (psi) | 6200 |
| Minimum Height (ft) | 5.23 |
| Minimum Height (in) | 62.7 |
| Overall Depth (in) | 18 |
| Overall Width (in) | 28 |
| Power Type | Pneumatic |
| Pump Ratio | 68:1 |
| Pump Type | Priming Piston |
| Standards Met | CE |
| Type | Supply Unit |
| Wetted Material | Alloy Steel, Stainless Steel, Acetal, Carbon-Filled PTFE, Carbon Steel, Ductile Iron, Electroless Nickel Plating, Zinc Plating, Chrome Plating, PTFE, UHMWPE, Aramind Reinforced Elastomer, Rubber-Based PSA, Polyurethane, Polyethylene, Nitrile Rubber, Zinc-Plated Carbon Steel, Buna-N |
| Ambient/Warm Melt/Hot Melt | Warm Melt |
| Application | Bonding, Sealing, Gasketing, Fluid Transfer, Unloading |
| Container Type | Pail |
| Control Panel Type | Enclosed |
| Material Container Volume (l) | 200 |
| Maximum Air Inlet Pressure (bar) | 10.34 |
| Maximum Air Inlet Pressure (kPa) | 1034 |
| Maximum Air Inlet Pressure (kg/cm²) | 10.55 |
| Maximum Flow Rate (L/min) | 12.1 |
| Maximum Fluid Pressure (bar) | 427.5 |
| Maximum Fluid Pressure (kPa) | 42750 |
| Maximum Height (cm) | 94 |
| Maximum Height (m) | 0.94 |
| Maximum Height (mm) | 940 |
| Maximum Operating Temperature (°C) | 70 |
| Maximum Working Pressure (MPa) | 43.4 |
| Maximum Working Pressure (bar) | 434 |
| Maximum Working Pressure (kPa) | 43400 |
| Minimum Height (cm) | 159.258 |
| Minimum Height (m) | 1.59 |
| Minimum Height (mm) | 1592.58 |
| Overall Depth (cm) | 45.72 |
| Overall Depth (mm) | 457.2 |
| Overall Width (cm) | 71.12 |
| Overall Width (mm) | 711.2 |
| Power Type | Pneumatic |
| Pump Ratio | 68:1 |
| Pump Type | Priming Piston |
| Standards Met | CE |
| Type | Supply Unit |
| Wetted Material | Alloy Steel, Stainless Steel, Acetal, Carbon-Filled PTFE, Carbon Steel, Ductile Iron, Electroless Nickel Plating, Zinc Plating, Chrome Plating, PTFE, UHMWPE, Aramind Reinforced Elastomer, Rubber-Based PSA, Polyurethane, Polyethylene, Nitrile Rubber, Zinc-Plated Carbon Steel, Buna-N |
