Check-Mate

23:1 Ratio 4 Zone Warm Melt System with NXT 2200/CM200, 3in RAM, INT Air Controls, 60L Carbon Steel Wiper Plate & Polyurethane Seal

WM224H

Check-Mate

23:1 Ratio 4 Zone Warm Melt System with NXT 2200/CM200, 3in RAM, INT Air Controls, 60L Carbon Steel Wiper Plate & Polyurethane Seal

WM224H

Designed specifically for sealants or adhesives that need to be warmed up to 100°C (212°F), Graco Warm Melt Supply Systems deliver superior temperature control. An excellent alternative to water-jacketed solutions.

Questions about this product?

Evaluating our products and need advice
before you buy?

Contact Us

Features

Product Brochure

Designed specifically for sealants or adhesives that need to be warmed up to 100°C (212°F), Graco Warm Melt Supply Systems deliver superior temperature control. An excellent alternative to water-jacketed solutions.

Bulk unloader for warm melt materials and temperature conditioning applications.

  • Bridges the gap between hot melt and ambient supply systems
  • Modular approach provides easy snap-on installation and eliminates complex point-to-point wiring
  • Intuitive, easy-to-use interface
  • Configurable to fit your unique application and material

Specifications & Documents

Technical Specifications

Convert to Imperial
Ambient/Warm Melt/Hot Melt Warm Melt
Application Bonding, Sealing, Gasketing, Fluid Transfer, Unloading
Container Type Pail
Control Panel Type Enclosed
Material Container Volume (gal) 5.3
Maximum Air Inlet Pressure (psi) 150
Maximum Flow Rate (GPM) 3.2
Maximum Fluid Pressure (psi) 2300
Maximum Height (ft) 3.08
Maximum Height (in) 37
Maximum Operating Temperature (°F) 158
Maximum Working Pressure (MPa) 16.1
Maximum Working Pressure (psi) 2300
Minimum Height (ft) 5.23
Minimum Height (in) 62.7
Overall Depth (in) 18
Overall Width (in) 28
Power Type Pneumatic
Pump Ratio 23:1
Pump Type Priming Piston
Standards Met CE
Type Supply Unit
Wetted Material Stainless Steel, Carbon Steel, Ductile Iron, Zinc Plating, Chrome Plating, Electroless Nickel Plating, Leather, UHMWPE, Nitrile Rubber, PTFE, Polyurethane, Carbon-Filled PTFE, MaxLife Plating, Acetal, Aramind Reinforced Elastomer, Rubber-Based PSA, Polyethylene, Zinc-Plated Carbon Steel, Buna-N
Ambient/Warm Melt/Hot Melt Warm Melt
Application Bonding, Sealing, Gasketing, Fluid Transfer, Unloading
Container Type Pail
Control Panel Type Enclosed
Material Container Volume (l) 20
Maximum Air Inlet Pressure (bar) 10.34
Maximum Air Inlet Pressure (kPa) 1034
Maximum Air Inlet Pressure (kg/cm²) 10.55
Maximum Flow Rate (L/min) 12.1
Maximum Fluid Pressure (bar) 158.8
Maximum Fluid Pressure (kPa) 15880
Maximum Height (cm) 94
Maximum Height (m) 0.94
Maximum Height (mm) 940
Maximum Operating Temperature (°C) 70
Maximum Working Pressure (MPa) 16.1
Maximum Working Pressure (bar) 161
Maximum Working Pressure (kPa) 16100
Minimum Height (cm) 159.258
Minimum Height (m) 1.59
Minimum Height (mm) 1592.58
Overall Depth (cm) 45.72
Overall Depth (mm) 457.2
Overall Width (cm) 71.12
Overall Width (mm) 711.2
Power Type Pneumatic
Pump Ratio 23:1
Pump Type Priming Piston
Standards Met CE
Type Supply Unit
Wetted Material Stainless Steel, Carbon Steel, Ductile Iron, Zinc Plating, Chrome Plating, Electroless Nickel Plating, Leather, UHMWPE, Nitrile Rubber, PTFE, Polyurethane, Carbon-Filled PTFE, MaxLife Plating, Acetal, Aramind Reinforced Elastomer, Rubber-Based PSA, Polyethylene, Zinc-Plated Carbon Steel, Buna-N

GET HELP FROM A LOCAL DEALER

Showing dealers for

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco